Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Measurement and Correlation of the Physicochemical Properties of Novel Aqueous Bis(3-aminopropyl)amine and Its Blend with N-Methyldiethanolamine for CO2 Capture

Das, B.[Bisweswar], Deogam, B.[Binay], Agrawal, Y.[Yatindra], Mandal, B.[Bishnupada]
J. Chem. Eng. Data 2016, 61, 7, 2226-2235
ABSTRACT
Physicochemical properties such as density and viscosity of aqueous novel bis(3-aminopropyl)amine (APA) and an aqueous novel blend of N-methyldiethanolamine (MDEA) and APA solutions as well as solubility and diffusivity of N2O into these binary and ternary solutions were measured from temperature T = 298 to 323 K at atmospheric pressure. In this study, experiments cover the molality range for APA = 0 1.291 mol*kg 1 and MDEA = 2.915 4.416 mol*kg 1. The diffusivity and solubility experiments were conducted with a wetted wall column absorber and Corning glass equilibrium cell, respectively. The experimental binary and ternary density data as well as binary viscosity data were correlated by Redlich Kister equation whereas ternary viscosity data were correlated by the Grunberg and Nissan model. On the other hand, solubility and diffusivity were correlated with different models. All of the correlations based on the different model performed are capable of adequately predicting experimental physicochemical data.
Compounds
# Formula Name
1 C6H17N3 bis(3-aminopropyl)amine
2 C5H13NO2 N-methyldiethanolamine
3 N2O nitrous oxide
4 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 6
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 6
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 3
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 3
  • POMD
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mass fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 12
  • POMD
  • 2
  • 4
  • Viscosity, Pa*s ; Liquid
  • Mass fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 12
  • POMD
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 6
  • POMD
  • 2
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 6
  • POMD
  • 2
  • 4
  • Binary diffusion coefficient, m2/s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • absorption column
  • 6
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 36
  • POMD
  • 1
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 36
  • POMD
  • 1
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 42
  • POMD
  • 1
  • 2
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 42
  • POMD
  • 1
  • 4
  • 3
  • Binary diffusion coefficient, m2/s ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 3; Liquid
  • Liquid
  • absorption column
  • 36
  • POMD
  • 1
  • 4
  • 3
  • Molality, mol/kg - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • phase equilibration
  • 36
  • POMD
  • 2
  • 4
  • 3
  • Binary diffusion coefficient, m2/s ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 3; Liquid
  • Liquid
  • absorption column
  • 6
  • POMD
  • 2
  • 4
  • 3
  • Molality, mol/kg - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • phase equilibration
  • 6
  • POMD
  • 1
  • 3
  • Molality, mol/kg - 3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • phase equilibration
  • 6