Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Vapor Liquid Equilibria Measurement of (Methanol + Ethanenitrile + Bis(trifluoromethylsulfonyl) Imide)-Based Ionic Liquids at 101.3 kPa

Zhang, Y.[Yuxin], Yu, D.[Dan], Guo, F.[Fan], Shen, Y.[Yang], Zhou, J.[Jiacheng], Li, Z.[Zhuo], Li, Q.[Qunsheng]
J. Chem. Eng. Data 2016, 61, 7, 2202-2208
ABSTRACT
Isobaric vapor liquid equilibria (VLE) data of the ternary system methanol + ethanenitrile +1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([EMIM][NTf2]) and methanol + ethanenitrile +1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide ([BMIM][NTf2]) as well as their binary system methanol + ethanenitrile (MeCN) were obtained using a improved Othmer still at 101.3 kPa. Results indicated that the addition of [EMIM][NTf2] or [BMIM][NTf2] can eliminate the azeotropic phenomenon of the binary system of methanol + MeCN when the mole fraction of the ionic liquids reach 0.05. Besides, the measured ternary data were well fitted with the nonrandom two-liquid model.
Compounds
# Formula Name
1 CH4O methanol
2 C2H3N acetonitrile
3 C8H11F6N3O4S2 1-ethyl-3-methylimidazolium bis((trifluoromethyl)sulfonyl)imide
4 C10H15F6N3O4S2 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 1
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 16
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Gas
  • Gas
  • Liquid
  • Chromatography
  • 16
  • POMD
  • 1
  • 2
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 3; Liquid
  • Solvent: Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 27
  • POMD
  • 1
  • 2
  • 3
  • Mole fraction - 1 ; Gas
  • Temperature, K; Gas
  • Solvent: Mole fraction - 1; Liquid
  • Mole fraction - 3; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 27
  • POMD
  • 1
  • 2
  • 4
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 4; Liquid
  • Solvent: Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 27
  • POMD
  • 1
  • 2
  • 4
  • Mole fraction - 1 ; Gas
  • Temperature, K; Gas
  • Solvent: Mole fraction - 1; Liquid
  • Mole fraction - 4; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 27