Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Accurate Density Measurements on Ternary Mixtures (Carbon Dioxide + Nitrogen + Argon) at Temperatures from (323.15 to 423.15) K with Pressures from (3 to 31) MPa using a Single-Sinker Densimeter

Yang, X.[Xiaoxian], Wang, Z.[Zhe], Li, Z.[Zheng]
J. Chem. Eng. Data 2015, 60, 11, 3353-3357
ABSTRACT
The densities of two ternary mixtures (0.900 carbon dioxide + 0.050 nitrogen + 0.050 argon and 0.950 carbon dioxide + 0.040 nitrogen + 0.010 argon in mole fraction) were measured at temperatures from (323.15 to 423.15) K with pressures from (3 to 31) MPa using a single-sinker magnetic suspension densimeter. The expanded measurement uncertainties (k = 2) were 35 mK for temperature, 3.4 kPa for pressure, and 0.033 % for density. Mixture samples were prepared gravimetrically with the expanded uncertainty (k = 2) in composition 0.001 mole fraction. With all of the measurement and composition effects considered, the expanded combined uncertainty (k = 2) in the density determination was generally within 0.2 % except at thermal states at the vicinity of the critical point near the Widom line. Relative deviations of the experimental data from the GERG-2008 equation of state (EOS), a Helmholtz energy model for natural gas mixtures, and from the EOS-CG, another new Helmholtz energy model for humid gases and fluid mixtures relevant for carbon capture and storage, were within 0.6 % for both mixtures. The relative deviation reached a maximum along the isotherm at the thermal state at the vicinity of the critical point near the Widom line.
Compounds
# Formula Name
1 CO2 carbon dioxide
2 N2 nitrogen
3 Ar argon
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 3
  • 2
  • Mass density, kg/m3 ; Gas
  • Pressure, kPa; Gas
  • Temperature, K; Gas
  • Mole fraction - 1; Gas
  • Mole fraction - 2; Gas
  • Gas
  • Buoyancy - hydrostatic balance with magnetic suspension - one sinker
  • 150