Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Isothermal Vapor-Liquid Equilibrium (VLE) and Vapor- Liquid-Liquid Equilibrium (VLLE) Data for Two Binary Systems Containing Perfluorohexane with Carbon Monoxide or Hydrogen Sulphide at (293, 313 and 333) K

Tshibangu, M.[Mulamba], Valtz, A.[Alain], Narasigadu, C.[Caleb], Coquelet, C.[Christophe], Ramjugernath, D.[Deresh]
J. Chem. Eng. Data 2015, 60, 8, 2461-2468
ABSTRACT
Isothermal vapor liquid equilibrium (VLE) and vapor liquid liquid equilibrium (VLLE) data are presented for binary systems containing perfluorohexane (C6F14) with carbon monoxide (CO) or hydrogen sulfide (H2S). Measurements were undertaken at three temperatures, viz. (293, 313, and 333) K, with pressures ranging from (0.322 to 24.497) MPa. An apparatus based on the static-analytic technique was used for the measurements. The equilibrium cell is equipped with a pneumatic capillary sampler, and equilibrium phase analysis is undertaken using a gas chromatograph. The uncertainties in the experimental measurements are 0.02 K, 0.0012 MPa, and 0.006 for temperature, pressure, and equilibrium phase mole fraction, respectively. The experimental data was modeled using the direct method using three different sets of thermodynamic models. The VLE data measured for the CO + C6F14 system were correlated using the Peng Robinson equation of state with the Mathias Copeman alpha function and the Wong Sandler mixing rule incorporating the NRTL (nonrandom two-liquid) activity coefficients model, while the VLE and VLLE data measured for the H2S + C6F14 system were correlated using the Soave Redlich Kwong equation of state incorporating the Mathias Copeman alpha function, and the MHV1 or MHV2 (modified Huron Vidal first and second order) mixing rules utilizing the NRTL activity coefficient model.
Compounds
# Formula Name
1 C6F14 perfluorohexane
2 CO carbon monoxide
3 H2S hydrogen sulfide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid mixture 1
  • Mole fraction - 2; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Liquid mixture 1
  • Gas
  • Closed cell (Static) method
  • 35
  • POMD
  • 1
  • 2
  • Mole fraction - 2 ; Gas
  • Mole fraction - 2; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Gas
  • Liquid mixture 1
  • Chromatography
  • 35
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid mixture 1
  • Mole fraction - 3; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Liquid mixture 1
  • Gas
  • Closed cell (Static) method
  • 37
  • POMD
  • 1
  • 3
  • Mole fraction - 3 ; Gas
  • Mole fraction - 3; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Gas
  • Liquid mixture 1
  • Chromatography
  • 37
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Gas
  • Closed cell (Static) method
  • 1
  • POMD
  • 1
  • 3
  • Mole fraction - 3 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Gas
  • Chromatography
  • 1
  • POMD
  • 1
  • 3
  • Mole fraction - 3 ; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Gas
  • Chromatography
  • 1
  • POMD
  • 1
  • 3
  • Mole fraction - 3 ; Gas
  • Temperature, K; Gas
  • Gas
  • Liquid mixture 1
  • Liquid mixture 2
  • Chromatography
  • 1