Thermodynamics Research Center / ThermoML | Journal of Chemical and Engineering Data

Solid + Liquid Equilibria for the Systems CsBr + ErBr3 + H2O and CsBr + ErBr3 + HBr (~12.3%) + H2O at 298.15 K and Atmospheric Pressure and Thermodynamic and Fluorescent Properties of the New Solid-Phase Compound

Li, Z.-W.[Zhao-Wan], Qiao, Z.-P.[Zhan-Ping], Dang, Y.-L.[Yuan-Lin], Chen, X.[Xin], Yang, Q.-C.[Qi-Chao]
J. Chem. Eng. Data 2015, 60, 6, 1900-1905
ABSTRACT
The phase equilibria of the ternary system CsBr + ErBr3 + H2O and the quaternary system CsBr + ErBr3 + HBr (~12.3 %) + H2O at 298.15 K were determined experimentally with the isothermal solubility method. Based on the measured solubility data, the corresponding phase diagrams were plotted. In the ternary system, three crystallization regions corresponding to CsBr, 3CsBr*2ErBr3*16H2O, and ErBr3*9H2O were found. Similarly, there were three crystallization regions corresponding to CsBr, 3CsBr*2ErBr3*16H2O, and ErBr3*7H2O in the quaternary system. The phase diagrams of the ternary and quaternary systems were compared, and it showed that (1) a new double salt 3CsBr*2ErBr3*16H2O was formed which was incongruently soluble in the two systems; (2) the area of the crystallization region of 3CsBr*2ErBr3*16H2O increased with the increasing concentration of HBr in the equilibrium liquid phase, and (3) ErBr3*9H2O transformed into ErBr3*7H2O when the HBr reached a certain amount. The new solid-phase compound 3CsBr*2ErBr3*16H2O was characterized by chemical analysis, XRD, and TG-DTG techniques. The standard molar enthalpy of solution of 3CsBr*2ErBr3*16H2O in water was confirmed to be -(6.69 +- 0.29) kJ*mol 1 by microcalorimetry in the limit of infinite dilution and its standard molar enthalpy of formation was determined to be -(7846.1 +- 1.2) kJ*mol 1. The fluorescence excitation and emission spectra of 3CsBr*2ErBr3*16H2O were measured. The results indicated that up-conversion spectra of the new solid phase compound exhibit at 470 nm and are excited at 710 nm.
Compounds
# Formula Name
1 BrCs cesium bromide
2 Br3Er erbium bromide (ErBr3)
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • 1
  • 2
  • Mass fraction - 1 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 13
  • POMD
  • 3
  • 1
  • 2
  • Mass fraction - 1 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • Titration method
  • 5
  • POMD
  • 3
  • 1
  • 2
  • Mass fraction - 1 ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Crystal of intercomponent compound 2
  • Titration method
  • 4
  • POMD
  • 3
  • 1
  • 2
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • Crystal - 1
  • Titration method
  • 1
  • POMD
  • 3
  • 1
  • 2
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 1
  • Crystal - 1
  • Titration method
  • 1
  • POMD
  • 3
  • 1
  • 2
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 2
  • Crystal of intercomponent compound 1
  • Titration method
  • 1
  • POMD
  • 3
  • 1
  • 2
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal of intercomponent compound 2
  • Crystal of intercomponent compound 1
  • Titration method
  • 1