Thermodynamics Research Center / ThermoML | Thermochimica Acta

Apparent thermodynamic analysis and the dissolution behavior of levamisole hydrochloride in three binary solvent mixtures

Zhang, Pengshuai, Sha, Jiao, Wan, Yameng, Zhang, Chi, Li, Tao, Ren, Baozeng
Thermochim. Acta 2019, 681, 178375
ABSTRACT
The solubility of levamisole hydrochloride (LH) in binary {methanol (MT) + ethanol (EA), methanol (MT) + 2-propanol (IPA)} solvent mixtures from 283.15 K to 323.15 K and dimethyl sulfoxide (DMSO) + ethanol (EA) from 293.15 K to 333.15 K were obtained under the pressure of 0.1MPa by using a dynamic method. Moreover, the experimental solubility results of LH in this work were correlated well with five thermodynamic models namely "Yaws model, van't Hoff model, Universal Quasi-Chemical (UNIQUAC) model, non-random two liquid (NRTL) model and general single (GSM) model". The minimum RMSD and ARD are 0.0064 and 0.17 respectively and they are both calculated with the GSM model. Besides, the apparent thermodynamic properties of LH in the selected binary solvent mixtures were discussed. Analysis results showed that enthalpy-favored mechanism plays a major role in the dissolution process of LH.
Compounds
# Formula Name
1 C11H13ClN2S (-)-Levamisole hydrochloride
2 CH4O methanol
3 C2H6O ethanol
4 C3H8O propan-2-ol
5 C2H6OS dimethyl sulfoxide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 1
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 1
  • 2
  • 3
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 36
  • POMD
  • 1
  • 2
  • 4
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 36
  • POMD
  • 1
  • 3
  • 5
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 38
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Titration method
  • 2