Thermodynamics Research Center / ThermoML | Thermochimica Acta

Molar heat capacity of aqueous solutions of 1,3-diaminopropane and 1,4-diaminobutane and their piperazine blends

Liang, K.-L.[Kai-Ling], Lin, Y.-F.[Yin-Feng], Leron, R. B.[Rhoda B.], Li, M.-H.[Meng-Hui]
Thermochim. Acta 2015, 616, 42-48
ABSTRACT
The molar heat capacity, Cp, of aqueous 1,3-diaminopropane (DAP), 1,4-diaminobutane (DAB) and their corresponding blends with piperazine (PZ) were measured at temperatures from 303.2 K to 353.2 K by differential scanning calorimetry. The correlation of Cp of the aqueous binary mixtures with temperature and concentration was successfully described by a Redlich Kister type equation using excess molar heat capacity data. A modified Sohnel and Novotny equation was used to represent the temperature and concentration dependence of Cp of the ternary mixtures. The average absolute deviations between the experimental and the predicted Cp data were 0.2% and 0.1% for the binary and ternary mixtures, respectively. The results suggest that the experimental data presented in this work were represented well by the proposed correlations.
Compounds
# Formula Name
1 C3H10N2 1,3-propanediamine
2 C4H12N2 1,4-butanediamine
3 C4H10N2 piperazine
4 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 11
  • POMD
  • 2
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 11
  • POMD
  • 1
  • 4
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 66
  • POMD
  • 2
  • 4
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 66
  • POMD
  • 1
  • 3
  • 4
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 44
  • POMD
  • 2
  • 3
  • 4
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 44