Thermodynamics Research Center / ThermoML | Thermochimica Acta

Thermodynamics of the NaCl-KCl system

Sergeev, D., Kobertz, D., Muller, M.
Thermochim. Acta 2015, 606, 25-33
ABSTRACT
The heat capacity of the solid phase of the NaCl-KCl mixtures was measured by the differential scanning calorimetry. These results and X-ray diffraction data were used for the explanation of the solid solution formation. The heat capacity of the liquid phase of the eutectic 50NaCl-50KCl mixture has been obtained in a closed glass container. The enthalpy increment (HT-H298.15) and the fusion enthalpy of the 50NaCl-50KCl mixture have been measured by a drop calorimeter. The joint analysis of these values with the heat capacity data allowed the calculation of the enthalpy of the solid solution. As the final result, the thermodynamic functions of the eutectic 50NaCl-50KCl mixture have been obtained.
Compounds
# Formula Name
1 ClNa sodium chloride
2 ClK potassium chloride
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 2
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 2
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Crystal
  • Mole fraction - 2; Crystal
  • Temperature, K; Crystal
  • Pressure, kPa; Crystal
  • Crystal
  • Small sample (50 mg) DSC
  • 46
  • POMD
  • 2
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Crystal of unknown type
  • Mole fraction - 2; Crystal of unknown type
  • Temperature, K; Crystal of unknown type
  • Pressure, kPa; Crystal of unknown type
  • Crystal of unknown type
  • Small sample (50 mg) DSC
  • 108
  • POMD
  • 2
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 5
  • POMD
  • 2
  • 1
  • Molar enthalpy, kJ/mol ; Crystal of unknown type
  • Temperature, K; Crystal of unknown type
  • Pressure, kPa; Crystal of unknown type
  • Mole fraction - 2; Crystal of unknown type
  • Crystal of unknown type
  • Drop calorimetry
  • 11
  • POMD
  • 2
  • 1
  • Molar enthalpy, kJ/mol ; Crystal
  • Temperature, K; Crystal
  • Pressure, kPa; Crystal
  • Mole fraction - 2; Crystal
  • Crystal
  • Drop calorimetry
  • 7
  • POMD
  • 2
  • 1
  • Molar enthalpy, kJ/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Drop calorimetry
  • 7