Thermodynamics Research Center / ThermoML | Thermochimica Acta

Heat Capacity, Thermal Conductivity and Thermal Diffusivity of Aqueous Sulfolane Solutions

Shokouhi, M.[Mohammad], Jalili, A. H.[Amir Hossein], Mohammadian, A. H.[Amir Hossein], Hosseini-Jenab, M.[Masih], Nouri, S. S.[Sasan Sadraei]
Thermochim. Acta 2013, 560, 63-70
ABSTRACT
In this work, the thermal properties including molar heat capacity, thermal conductivity, and thermal diffusivity of aqueous sulfolane solutions were measured at temperatures ranging from (303.15 to 353.15) K and atmospheric pressure. The measurements were carried out for the entire range of mole fractions of sulfolane in water. Molar excess heat capacities as well as excess thermal conductivities and excess thermal diffusivities were calculated from the experimental values and correlated as a function of mole fraction and temperature using the Redlich-Kister equation. Employing the heat capacity, thermal conductivity and thermal diffusivity of pure water as the solvent, the corresponding experimental values obtained for the investigated solutions were also correlated with temperature and concentration by a modified Setchenow equation. Results show comparable accuracy of both models in correlating all three experimental thermal properties.
Compounds
# Formula Name
1 C4H8O2S sulfolane
2 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 6
  • POMD
  • 1
  • Thermal conductivity, W/m/K ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Hot wire method
  • 6
  • POMD
  • 2
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 6
  • POMD
  • 2
  • Thermal conductivity, W/m/K ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Hot wire method
  • 6
  • POMD
  • 1
  • 2
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 66
  • POMD
  • 1
  • 2
  • Thermal conductivity, W/m/K ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Hot wire method
  • 66