Thermodynamics Research Center / ThermoML | Thermochimica Acta

DSC determination of partial ternary phase diagrams of methanol/sodium chloride/water and propylene glycol/sodium chloride/water and their applications for synthesized diagrams

Weng, L.[Lindong], Li, W.[Weizhong], Zuo, J.[Jianguo]
Thermochim. Acta 2011, 512, 1-2, 225-32
ABSTRACT
The present study presents partial ternary phase diagrams of methanol/sodium chloride/water and propylene glycol/sodium chloride/water systems with compositions of cryobiological interests (Rless than20 and xless than30) by means of differential scanning calorimeter. To synthesize the ternary phase diagram through its relevant binary ones, the partial binary phase diagrams of methanol and propylene glycol aqueous solutions are experimentally determined as well. Ultimately, the equations characterizing the liquid surface of these two kinds of alcohol ternary systems are obtained and the polynomial representations for binary phase diagrams of methanol and propylene glycol aqueous solutions are also published in this study. The results show an excellent agreement between the experimental and synthesized data (less than }2.5 ) of these ternary systems. The results will enrich our understanding on the protection mechanism of these two cryoprotectants, as well as providing new evidences of the feasibility of synthesizing ternary phase diagrams of cryobiological interests.
Compounds
# Formula Name
1 CH4O methanol
2 H2O water
3 C3H8O2 1,2-propanediol
4 ClNa sodium chloride
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • DTA
  • 5
  • POMD
  • 3
  • 2
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Molality, mol/kg - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • DTA
  • 5
  • POMD
  • 1
  • 4
  • 2
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mass fraction - 2; Liquid
  • Solvent: Mass ratio of component to other component of binary solvent - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • DTA
  • 13
  • POMD
  • 3
  • 4
  • 2
  • Solid-liquid equilibrium temperature, K ; Liquid
  • Mass fraction - 2; Liquid
  • Solvent: Mass ratio of component to other component of binary solvent - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • DTA
  • 15