Thermodynamics Research Center / ThermoML | Thermochimica Acta

Volumetric and transport properties of ternary mixtures containing 1-propanol + ethyl ethanoate + cyclohexane or benzene at 303.15 K: Experimental data, correlation and prediction by ERAS model

Oswal, S. L., Ghael, N. Y., Gardas, R. L.
Thermochim. Acta 2009, 484, 1-2, 11-21
ABSTRACT
The excess molar volumes (VEm ), viscosity deviations ( ), and excess Gibbs energies of activation ( G*E) of viscous flowhave been investigated from densities and viscosities measurements for two ternary mixtures 1-propanol + ethyl ethanoate + cyclohexane and 1-propanol + ethyl ethanoate + benzene and four binaries at 303.15K and atmospheric pressure over the entire range of composition. The empirical equations due to Redlich Kister, Kohler, Rastogi et al., Jacob Fitzner, Tsao Smith, Lark et al., Heric Brewer, and Singh et al., have been employed to correlate VEm , , and G*E of ternary mixtures with their corresponding binary parameters. The results are discussed in terms of the molecular interactions between the components of the mixtures. Further, the ERAS model has been examined to estimate VEm for the binary and ternary mixtures and the results are compared with the experimental data.
Compounds
# Formula Name
1 C6H12 cyclohexane
2 C6H6 benzene
3 C3H8O propan-1-ol
4 C4H8O2 ethyl acetate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 4
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 3
  • 1
  • 4
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 3; Liquid
  • Mole fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 33
  • POMD
  • 3
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 3; Liquid
  • Mole fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 27
  • POMD
  • 3
  • 2
  • 4
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 3; Liquid
  • Mole fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 37
  • POMD
  • 3
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 3; Liquid
  • Mole fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 25