Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Solubility modelling and preferential solvation of adenine in solvent mixtures of (N,N-dimethylformamide, N-methyl pyrrolidone, propylene glycol and dimethyl sulfoxide) plus water

Xu, Renjie, Zheng, Min, Farajtabar, Ali, Zhao, Hongkun
J. Chem. Thermodyn. 2018, 125, 225-234
ABSTRACT
The equilibrium solubility of adenine in solvent mixtures of N,N-dimethylformamide (DMF) + water, N-methyl pyrrolidone (NMP) + water, propylene glycol (PG) + water and dimethyl sulfoxide (DMSO) + water were determined experimentally by using shake-flask method within the temperature range from (278.15 to 318.15) K under atmospheric pressure (101.1 kPa). Linear solvation energy relationships concept was used to describe the variation in the solubility based on the solvent effect. The preferential solvation parameters were derived from their thermodynamic solution properties by means of the inverse Kirkwood-Buff integrals. The preferential solvation parameters (deltax1,3) for DMF, NMP, PG or DMSO were negative in the four solvent mixtures with water-rich compositions, which indicated that adenine was preferentially solvated by water. Temperature has little effect on the preferential solvation magnitudes. The higher solvation by water could be explained in terms of the higher acidic behavior of the solvents interacting with the Lewis basic groups of the adenine. Besides, the solubility of this drug was mathematically represented by using the Jouyban-Acree model, van't Hoff-Jouyban-Acree model and Apelblat-Jouyban-Acree model obtaining average relative deviations lower than 1.23% for correlative studies. The standard dissolution enthalpies of adenine in the solvent mixtures were obtained. Positive values of the standard molar enthalpy demonstrated that the dissolution process of adenine was endothermic, and the entropy was driving force for the dissolution process.
Compounds
# Formula Name
1 C5H5N5 6-amino-1H-purine
2 C3H7NO dimethylformamide
3 C5H9NO N-methylpyrrolidone
4 C3H8O2 1,2-propanediol
5 C2H6OS dimethyl sulfoxide
6 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 6
  • Mole fraction - 1 ; Liquid
  • Solvent: Mass fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 99
  • POMD
  • 1
  • 3
  • 6
  • Mole fraction - 1 ; Liquid
  • Solvent: Mass fraction - 3; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 99
  • POMD
  • 1
  • 4
  • 6
  • Mole fraction - 1 ; Liquid
  • Solvent: Mass fraction - 4; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 99
  • POMD
  • 1
  • 5
  • 6
  • Mole fraction - 1 ; Liquid
  • Solvent: Mass fraction - 5; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 66
  • POMD
  • 1
  • 6
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 9
  • POMD
  • 1
  • 2
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 9
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 9
  • POMD
  • 1
  • 4
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 9
  • POMD
  • 1
  • 5
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 6