Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Influence of temperature and pressure on the density and speed of sound of 2-hydroxyethylammonium propionate ionic liquid

Sarabando, Joao A., Magano, Paulo J.M., Ferreira, Abel G.M., Santos, Jaime B., Carvalho, Pedro J., Mattedi, Silvana, Fonseca, Isabel M.A.
J. Chem. Thermodyn. 2018, 122, 183-193
ABSTRACT
The alkanolammonium ILs are protic ionic liquids (PILs) with huge potential in a variety of industrial fields. Among other advantages, these PILs have low cost of preparation, simple synthesis and purification methodologies and low toxicity. This study aims at obtaining significant data on the fundamental thermophysical properties of hydroxyethylammonium-based PILs with carboxylate anions. The density was measured within the temperature and pressure intervals (298.15 -343.15) K and (0.1 -35.0) MPa for 2-hydroxyethylammonium propionate, [2-HEA][Pr]. The speed of sound was determined in the ranges (303.15 -353.15) K and (0.1 -20.0) MPa for the same substance. The estimated combined standard uncertainties are /0.45 kg*m-3 for density and /1.6 m*s-1 for speed of sound. The experimental pVT data were fitted using the Goharshadi -Morsali-Abbaspour equation of state (GMA EoS) with average relative absolute deviation (%AARD) of 0.03%. Thermomechanical coefficients as the thermal expansivity, isothermal compressibility, and internal pressure, were calculated using GMA EoS with the internal pressure being further compared with calculated values of cohesive energy density. The experimental pVT data were further successfully described by the predictive methods of Gardas and Coutinho and Paduszyki and Domaska.
Compounds
# Formula Name
1 C5H13NO3 2-hydroxyethan-1-aminium propionate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 42
  • POMD
  • 1
  • Speed of sound, m/s ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Frequency, MHz; Liquid
  • Liquid
  • Single path-length method
  • 126