Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Volumetric and transport properties of binary liquid mixtures with 1-ethyl-3-methylimidazolium ethyl sulfate as candidate solvents for regenerative flue gas desulfurization processes

Zivkovic, Emila M., Zivkovic, Nikola V., Majstorovic, Divna M., Stanimirovic, Andrej M., Kijevcanin, Mirjana Lj.
J. Chem. Thermodyn. 2018, 119, 135-154
ABSTRACT
This paper presents novel data on density, viscosity and refractive index of four binary mixtures constituted of ionic liquid 1-ethyl-3-methylimidazolium ethyl sulfate and N-methyl-2-pyrrolidone/or 1-hexanol/or liquid polyethylene glycols with molar mass 200/or 400, in the temperature range from T = 288.15 K to 333.15 K and at pressure of p = .1 MPa. Thermal conductivity has been measured for mixtures of ionic liquid and polyethylene glycol 200/or polyethylene glycol 400 in the temperature range from T = 303.15 to 323.15 K and at a pressure of p = .1 MPa. All these solutions have the potential for application in regenerative flue gas desulfurization processes. From experimental values of densities, viscosities, thermal conductivities and refractive indices, excess molar volumes and deviations in viscosity, thermal conductivity and refractive index have been calculated and correlated with Redlich-Kister polynomial equation. The values of excess and deviation functions were used for analysis of molecular interactions present in the investigated solutions. In addition, modeling of transport properties, viscosity and thermal conductivity, was carried out and the obtained results were interpreted taking into account the applied approaches and models.
Compounds
# Formula Name
1 C8H16N2O4S 1-ethyl-3-methylimidazolium ethyl sulfate
2 C5H9NO N-methylpyrrolidone
3 C6H14O hexan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Thermal conductivity, W/m/K ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • THOTW
  • 5
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 10
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 10
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 10
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 8
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 8
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 8
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 110
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 110
  • POMD
  • 1
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 110
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 88
  • POMD
  • 1
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Concentric cylinders viscometry
  • 88
  • POMD
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 88