Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Isothermal vapour-liquid equilibrium data for binary systems of (CHF3 or C2F6) with (1-hexene or 3-methylpentane)

Williams-Wynn, Mark D., Naidoo, Paramespri, Ramjugernath, Deresh
J. Chem. Thermodyn. 2018, 121, 79-90
ABSTRACT
The isothermal vapour-liquid equilibria of R-23 + 1-hexene, R-23 + 3-methylpentane, R-116 + 1-hexene and R-116 + 3-methylpentane were measured at temperatures of between (293.1 and 313.3) K with a static-analytic apparatus. Vapour-liquid-liquid equilibria was exhibited by the R-116 + 1-hexene system. The equilibrium data was modelled with the PR EOS, modified with the MC alpha function, and the WS mixing rule with either the NRTL or the UNIQUAC activity coefficient model. Both the temperature dependent and the temperature independent forms of the models were regressed to the experimental data. The method of Ungerer et al. was used to extrapolate the subcritical co-existence data to the mixture critical loci, while the method of Heidemann and Khalil was used to estimate the critical locus curves for the systems. Each of the four systems were also categorised according to the classification system of van Konynenburg and Scott.
Compounds
# Formula Name
1 CHF3 trifluoromethane
2 C2F6 hexafluoroethane
3 C6H12 hex-1-ene
4 C6H14 3-methylpentane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 5
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 2
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 5
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 2
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 37
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 37
  • POMD
  • 1
  • 4
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 38
  • POMD
  • 1
  • 4
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 38
  • POMD
  • 2
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 39
  • POMD
  • 2
  • 3
  • Mole fraction - 2 ; Gas
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 39
  • POMD
  • 2
  • 3
  • Mole fraction - 2 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Chromatography
  • 2
  • POMD
  • 2
  • 3
  • Mole fraction - 2 ; Liquid mixture 2
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 2
  • Liquid mixture 1
  • Chromatography
  • 2
  • POMD
  • 2
  • 4
  • Vapor or sublimation pressure, kPa ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Closed cell (Static) method
  • 37
  • POMD
  • 2
  • 4
  • Mole fraction - 2 ; Gas
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 37