Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Measurement and correlation of isobaric vapour-liquid equilibria for binary systems of 1-(methoxymethoxy)-2-methyl-propane with 1-butanol and isobutanol at 101.33 kPa

Song, Y.-H.[Yu-He], Li, C.-F.[Cun-Fu], Song, J.[Juan], Huang, H.[Hua], Wei, P.-H.[Ping-He], Li, J. Q.[Joshua Qingsong]
J. Chem. Thermodyn. 2017, 115, 202-208
ABSTRACT
Isobaric vapour-liquid equilibria (VLE) experimental results for binary systems of 1-(methoxymethoxy)- 2-methyl-propane with 1-butanol and isobutanol at 101.33 kPa were determined. Each binary mixture shows a minimum boiling azeotrope at 101.33 kPa, in which the azeotropic temperature and composition are 381.19 K and 26.72 mol% (1-butanol) and 377.55 K and 53.34 mol% (isobutanol), respectively. The VLE measurements were correlated by the van Laar, Wilson and NRTL models for which the binary interaction parameters are reported. The results show that the measurements of two binary systems provide a good agreement with the calculated values acquired by the Wilson and NRTL models, respectively. The thermodynamic consistency of the VLE measurements was checked using the traditional area test and the direct test methods.
Compounds
# Formula Name
1 C4H10O butan-1-ol
2 C4H10O 2-methyl-1-propanol
3 C6H14O2 1-(methoxymethoxy)-2-methylpropane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 10
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 2
  • POMD
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 15
  • POMD
  • 1
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 21
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Gas
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 21
  • POMD
  • 2
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 26
  • POMD
  • 2
  • 3
  • Mole fraction - 2 ; Gas
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 26