Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Measurement and correlation of (vapour-liquid) equilibrium for binary mixtures composed of 1-(ethoxymethoxy)-propane with ethanol and 1-propanol at 101.33 kPa

Song, Y.-H.[Yu-He], Wei, P.-H.[Ping-He], Song, J.[Juan], Huang, H.[Hua], Li, J. Q.[Joshua Qingsong]
J. Chem. Thermodyn. 2017, 110, 237-242
ABSTRACT
Experimental vapour liquid equilibrium (VLE) for binary mixtures composed of 1-(ethoxymethoxy)- propane with ethanol and 1-propanol at 101.33 kPa was measured. The experimental data of saturated vapour pressure for 1-(ethoxymethoxy)-propane was measured. The measurements were performed using an improved Rose equilibrium still. Two binary systems present a minimum boiling azeotropes at 101.33 kPa, in which the azeotropic temperature and composition are 351.45 K and 95.98 mol% (ethanol) and 369.44 K and 81.30 mol% (1-propanol), respectively. The VLE experimental values were correlated with the help of the NRTL, Wilson, and van Laar models for which the binary interaction parameters are reported. The results showed that the measurements have a good correlation under the NRTL and Wilson models about two binary systems, respectively. The thermodynamic consistency of the VLE experimental data was checked using the traditional area test and the direct test methods.
Compounds
# Formula Name
1 C6H14O2 1-(ethoxymethoxy)propane
2 C2H6O ethanol
3 C3H8O propan-1-ol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 19
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Boiling temperature at pressure P, K ; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 1
  • POMD
  • 2
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 24
  • POMD
  • 2
  • 1
  • Mole fraction - 2 ; Gas
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 24
  • POMD
  • 3
  • 1
  • Boiling temperature at pressure P, K ; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Gas
  • Ebulliometric method (Recirculating still)
  • 25
  • POMD
  • 3
  • 1
  • Mole fraction - 3 ; Gas
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Gas
  • Liquid
  • Chromatography
  • 25