Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Stable (solid + liquid) phase equilibrium for the ternary system (NaCl + RbCl + H2O) at T = (288.15, 298.15 and 308.15) K

Gao, Y.[Yunxue], Li, S.[Shuni], Zhai, Q.[Quanguo], Jiang, Y.[Yucheng], Hu, M.[Mancheng]
J. Chem. Thermodyn. 2017, 106, 256-261
ABSTRACT
The (solid + liquid) phase equilibrium of the ternary system (NaCl + RbCl + H2O) at T = (288.15, 298.15 and 308.15) K was studied by the method of isothermal solution saturation. Moreover, the density and refractive index of the solution was also determined. The solid phase was studied by the Schreinemaker s wet residue method and verified by X-ray diffraction. The results show that each of the phase diagrams contains one invariant point, two univariant curves, and three crystallization regions. The crystallization region of NaCl increased obviously with the temperature increasing, while the crystallization regions of RbCl and the mixed crystallization region of (NaCl + RbCl) decreased a little. Furthermore, there are break points at the invariant points for density and refractive index curves.
Compounds
# Formula Name
1 H2O water
2 ClNa sodium chloride
3 ClRb rubidium chloride
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 3; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 53
  • POMD
  • 2
  • 1
  • 3
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Gravimetric method
  • 39
  • POMD
  • 2
  • 1
  • 3
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Gravimetric method
  • 17
  • POMD
  • 2
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 3; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 53
  • POMD
  • 2
  • 1
  • 3
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Crystal - 2
  • Gravimetric method
  • 3
  • POMD
  • 2
  • 1
  • 3
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Crystal - 2
  • Gravimetric method
  • 3
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 3
  • POMD
  • 2
  • 1
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Gravimetric method
  • 3
  • POMD
  • 2
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 3
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 3
  • POMD
  • 1
  • 3
  • Mass fraction - 3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • Gravimetric method
  • 3
  • POMD
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 3