Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Thermophysical characterization of 1-ethylpyridinium triflate and comparison with similar ionic liquids

Garcia-Andreu, M.[Maria], Castro, M.[Miguel], Gascon, I.[Ignacio], Lafuente, C.[Carlos]
J. Chem. Thermodyn. 2016, 103, 395-402
ABSTRACT
We present here a comprehensive thermophysical study of the piridynium-based ionic liquid: 1- ethylpyridinium triflate. Density, speed of sound, refractive index, surface tension, isobaric molar heat capacity, kinematic viscosity and electrical conductivity have been determined in the temperature range (293.15 338.15 K) and at pressure of 0.1 MPa, density was also measured in the pressure range (0.1 40 MPa) at T = 303.15 K. From these values, some derived properties have been calculated. In addition the thermal behaviour around the melting point has been registered. All these properties have been discussed and compared with those of two similar ionic liquids, 1-ethylpyridinium bis(trifluoromethylsulfo nyl)imide and 1-butylpyridinium triflate.
Compounds
# Formula Name
1 C8H10F3NO3S 1-ethylpyridinium triflate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal 1
  • Crystal 1
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 1
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal 1
  • Crystal 1
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 1
  • Triple point temperature, K ; Crystal 2
  • Crystal 2
  • Crystal 1
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 1
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal 2
  • Crystal 2
  • Crystal 1
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Metastable liquid
  • Temperature, K; Metastable liquid
  • Pressure, kPa; Metastable liquid
  • Metastable liquid
  • Vibrating tube method
  • 19
  • POMD
  • 1
  • Refractive index (Na D-line) ; Metastable liquid
  • Temperature, K; Metastable liquid
  • Pressure, kPa; Metastable liquid
  • Metastable liquid
  • Standard Abbe refractometry
  • 19
  • POMD
  • 1
  • Surface tension liquid-gas, N/m ; Metastable liquid
  • Temperature, K; Metastable liquid
  • Metastable liquid
  • Air at 1 atmosphere
  • Drop volume
  • 19
  • POMD
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Metastable liquid
  • Temperature, K; Metastable liquid
  • Pressure, kPa; Metastable liquid
  • Metastable liquid
  • Small sample (50 mg) DSC
  • 19
  • POMD
  • 1
  • Kinematic viscosity, m2/s ; Metastable liquid
  • Temperature, K; Metastable liquid
  • Pressure, kPa; Metastable liquid
  • Metastable liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 19
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 9
  • POMD
  • 1
  • Speed of sound, m/s ; Metastable liquid
  • Temperature, K; Metastable liquid
  • Pressure, kPa; Metastable liquid
  • Frequency, MHz; Metastable liquid
  • Metastable liquid
  • Sing-around technique in a fixed-path interferometer
  • 19
  • POMD
  • 1
  • Electrical conductivity, S/m ; Metastable liquid
  • Temperature, K; Metastable liquid
  • Pressure, kPa; Metastable liquid
  • Frequency, MHz; Metastable liquid
  • Metastable liquid
  • Alternating current cell with electrodes
  • 19