Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Solid-liquid equilibrium and phase diagram for the ternary (2-naphthaldehyde + o-phthalic anhydride + 1,4-dioxane) system

Yu, Y.[Yi], Zhang, F.[Fang], Gao, X.[Xiaoqiang], Xu, L.[Li], Liu, G.[Guoji]
J. Chem. Thermodyn. 2016, 101, 308-315
ABSTRACT
In this research, solid-liquid equilibrium for the ternary system (2-naphthaldehyde + o-phthalic anhydride + 1,4-dioxane) was measured at 283.15 K, 293.15 K and 303.15 K, respectively. Three isothermal phase diagrams of the system were plotted using the values of the experimental solubility. Pure 2-naphthaldehyde and o-phthalic anhydride were formed at (283.15, 293.15 and 303.15) K, and were determined by Schreinemaker s wet residue method. The crystallization region of o-phthalic anhydride was found to be much larger than that of 2-naphthaldehyde at a certain temperature. The experimental solubility at multiple temperatures was correlated by the NRTL and Wilson models. The NRTL model was more accurate than the Wilson model in this system. The diagram of density versus component was also constructed.
Compounds
# Formula Name
1 C11H8O .beta.-naphthaldehyde
2 C8H4O3 isobenzofuran-1,3-dione
3 C4H8O2 1,4-dioxane
4 H2O water
5 C7H6O2 benzoic acid
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Chromatography
  • 21
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 21
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Crystal - 1
  • Chromatography
  • 3
  • POMD
  • 1
  • 2
  • 3
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Crystal - 1
  • Chromatography
  • 3
  • POMD
  • 1
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 39
  • POMD
  • 1
  • 3
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 6
  • POMD
  • 1
  • 3
  • Mass fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Chromatography
  • 3
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 3
  • POMD
  • 2
  • 3
  • Mole fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Chromatography
  • 6
  • POMD
  • 2
  • 3
  • Mass fraction - 2 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Chromatography
  • 3
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 3
  • POMD
  • 5
  • 4
  • Mole fraction - 5 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • Chromatography
  • 8