Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Properties for binary mixtures of (acetamide + KSCN) eutectic ionic liquid with ethanol at several temperatures

Liu, B.[Baoyou], Liu, Y.[Yaru]
J. Chem. Thermodyn. 2016, 92, 1-7
ABSTRACT
Density, viscosity and conductivity were determined for the binary mixture of (acetamide + KSCN) eutectic ionic liquid with ethanol at T = (298.15, 303.15, 308.15, 313.15, 318.15) K and atmospheric pressure. The density, viscosity values decrease with the increase of temperature while the conductivity values increase over the whole concentration range. The density and viscosity values decrease monotonically with the increase of the mole content of ethanol. From the experimental values, excess molar volumes VE and viscosity deviations Dg for the binary mixture were calculated and VE and Dg were both well fitted by a third order Redlich Kister equation. With the increase mole fraction of ethanol, the conductivity values of the mixture increase gradually first and then decrease dramatically, and the highest conductivity values appear at 0.8562 mol fraction of ethanol. The relationship between the conductivity and the mole fraction of ethanol can be well described by a Castell Amis equation. The interactions with ethanol molecular and ions of (acetamide + KSCN) ionic liquid were discussed by FTIR spectra.
Compounds
# Formula Name
1 CKNS potassium thiocyanate
2 C2H6O ethanol
3 C2H5NO ethanamide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 5
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 5
  • POMD
  • 3
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Solvent: Mole fraction - 1; Liquid
  • Liquid
  • Pycnometric method
  • 70
  • POMD
  • 3
  • 2
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Solvent: Mole fraction - 1; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 70
  • POMD
  • 3
  • 2
  • 1
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Solvent: Mole fraction - 1; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 70
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Pycnometric method
  • 5
  • POMD
  • 3
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 5
  • POMD
  • 3
  • 1
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 1; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 5