Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate, an efficient solvent for extraction of acetone from aqueous solutions

Saien, J.[Javad], Badieh, M. M. S.[Marjan Mohammadi Sarab], Norouzi, M.[Mahdi], Salehzadeh, S.[Sadegh]
J. Chem. Thermodyn. 2015, 91, 404-413
ABSTRACT
(Liquid + liquid) equilibrium (LLE) of the chemical system of {water + acetone + 1-Hexyl-3- methylimidazolium hexafluorophosphate (HMIMPF6) ionic liquid} was studied at different temperatures of (293.2, 298.2 and 303.2) K and under atmospheric pressure of 81.5 kPa. The results show that HMIMPF6 provides the acetone distribution coefficient and separation factor values within (0.8813 to 1.2351) and (3.0 to 54.4), respectively; indicating the high capability of the ionic liquid for extraction of acetone from aqueous solutions. In most cases, acetone solubility in the ionic liquid is higher than in water, especially at higher solute concentrations. Meanwhile, higher separation factor is relevant to the lower temperature due to lower (water + ionic liquid) miscibility. The consistency of tie line data, at each temperature, was examined with Othmer.Tobias correlation. The values were nicely reproduced with the well-known NRTL and UNIQUAC models. Accordingly, the required thermodynamic properties of HMIMPF6 were obtained by the Density Functional Theory (DFT) calculations, carried out at the M06/6-311++G.. level of theory. The root mean square deviations (RMSD) between experimental and model concentration values were 0.0192 and 0.0255, respectively; indicating close agreement of the both models.
Compounds
# Formula Name
1 C10H19F6N2P 1-hexyl-3-methylimidazolium hexafluorophosphate
2 H2O water
3 C3H6O acetone
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 3
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 3
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 3
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 3
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 3
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 3
  • POMD
  • 3
  • 2
  • 1
  • Mass fraction - 3 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Mass fraction - 2; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • 27
  • POMD
  • 3
  • 2
  • 1
  • Mass fraction - 3 ; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Mass fraction - 2; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Titration method
  • 27
  • POMD
  • 3
  • 2
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 54
  • POMD
  • 3
  • 2
  • 1
  • Mass fraction - 2 ; Liquid mixture 1
  • Mass fraction - 2 ; Liquid mixture 2
  • Mass fraction - 3 ; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Mass fraction - 3; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 1
  • Liquid mixture 2
  • Index of refraction calibration data
  • Index of refraction calibration data
  • Index of refraction calibration data
  • 23
  • POMD
  • 2
  • 1
  • Mass fraction - 2 ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Pressure, kPa; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Titration method
  • 3
  • POMD
  • 2
  • 1
  • Mass fraction - 2 ; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Titration method
  • 3
  • POMD
  • 2
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 6