Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

A comprehensive study of {.gamma.-butyrolactone + 1-methyl-3- propylimidazolium bis(trifluoromethylsulfonyl)imide} binary mixtures

Papovic, S.[Snezana], Vranes, M.[Milan], Gadzuric, S.[Slobodan]
J. Chem. Thermodyn. 2015, 91, 360-368
ABSTRACT
Density, electrical conductivity and viscosity of binary liquid mixtures of .gamma.-butyrolactone, (GBL) with 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide, [pmim][NTf2], were measured at different temperatures from (293.15 to 323.15) K and at atmospheric pressure (p = 0.1 MPa) over the whole composition range. Excess molar volumes have been calculated from the experimental densities and were fitted with Redlich Kister s polynomial equation. Other volumetric properties have been also calculated in order to obtain information about interactions between GBL and selected ionic liquid. All the results are compared with those obtained for binary mixtures of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][NTf2], with GBL. From the viscosity measurements, the Angell strength parameter was calculated for pure ionic liquid indicating that [pmim][NTf2] is a fragile liquid. Electrical conductivity results were discussed in the scope of Bahe Varela theoretical model.
Compounds
# Formula Name
1 C4H6O2 .gamma.-butyrolactone
2 C9H13F6N3O4S2 1-methyl-3-propylimidazolium bis[(trifluoromethyl)sulfonyl]imide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 7
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Cone and plate viscometry
  • 7
  • POMD
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Direct current cell with electrodes
  • 7
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 84
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Cone and plate viscometry
  • 84
  • POMD
  • 1
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Direct current cell with electrodes
  • 84