Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Experimental investigation on the dissociation conditions of methane hydrate in the presence of imidazolium-based ionic liquids

Sabil, K. M.[Khalik M.], Nashed, O.[Omar], Lal, B.[Bhajan], Ismail, L.[Lukman], Japper-Jaafar, A.[Azuraien]
J. Chem. Thermodyn. 2015, 84, 7-13
ABSTRACT
In this work, the performance of nine ionic liquids (ILs) as thermodynamic hydrate inhibitors is investigated. The dissociation temperature is determined for methane gas hydrates using a high pressure micro deferential scanning calorimeter between (3.6 and 11.2) MPa. All the aqueous IL solutions are studied at a mass fraction of 0.10. The performance of the two best ILs is further investigated at various concentrations. Electrical conductivity and pH of these aqueous IL solutions (0.10 mass fraction) are also measured. The enthalpy of gas hydrate dissociation is calculated by the Clausius Clapeyron equation. It is found that the ILs shift the methane hydrate (liquid + vapour) equilibrium curve (HLVE) to lower temperature and higher pressure. Our results indicate 1-(2-hydroxyethyl) 3-methylimidazolium chloride is the best among the ILs studied as a thermodynamic hydrate inhibitor. A statistical analysis reveals there is a moderate correlation between electrical conductivity and the efficiency of the IL as a gas hydrate inhibitor. The average enthalpies of methane hydrate dissociation in the presence of these ILs are found to be in the range of (57.0 to 59.1) kJ mol 1. There is no significant difference between the dissociation enthalpy of methane hydrate either in the presence or in absence of ILs.
Compounds
# Formula Name
1 C6H11ClN2O 1-(2-hydroxyethyl)-3-methyl-1H-imidazolium chloride
2 C6H11BrN2O 3-(2-hydroxyethyl)-1-methyl-1H-imidazolium bromide
3 C8H15BrN2 1-butyl-3-methylimidazolium bromide
4 C8H15ClN2 1-butyl-3-methylimidazolium chloride
5 C8H15ClN2O4 1-butyl-3-methylimidazolium perchlorate
6 C10H15N5 1-butyl-3-methylimidazolium dicyanamide
7 C8H16N2O4S 1-butyl-3-methylimidazolium hydrogen sulfate
8 C9H15F3N2O3S 1-butyl-3-methylimidazolium trifluoromethanesulfonate
9 C9H18N2O4S 1-butyl-3-methylimidazolium methyl sulfate
10 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 10
  • 5
  • Electrical conductivity, S/m ; Liquid
  • Mass fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 1
  • POMD
  • 10
  • 9
  • Electrical conductivity, S/m ; Liquid
  • Mass fraction - 9; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 1
  • POMD
  • 10
  • 8
  • Electrical conductivity, S/m ; Liquid
  • Mass fraction - 8; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 1
  • POMD
  • 10
  • 6
  • Electrical conductivity, S/m ; Liquid
  • Mass fraction - 6; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 1
  • POMD
  • 10
  • 3
  • Electrical conductivity, S/m ; Liquid
  • Mass fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 1
  • POMD
  • 10
  • 4
  • Electrical conductivity, S/m ; Liquid
  • Mass fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 1
  • POMD
  • 10
  • 2
  • Electrical conductivity, S/m ; Liquid
  • Mass fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 1
  • POMD
  • 10
  • 7
  • Electrical conductivity, S/m ; Liquid
  • Mass fraction - 7; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 1
  • POMD
  • 10
  • 1
  • Electrical conductivity, S/m ; Liquid
  • Mass fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 1