Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Effect of N,N'-bis(2-pyridylmethylidene)-1,2-diiminoethane Schiff base (BPIE) on the thermodynamic properties of the ionic liquid 1-hexyl-3-methylimidazolium chloride in N,N-dimethylacetamide solvent at T = 298.15 K

Shekaari, H.[Hemayat], Kazempour, A.[Amir], Khoshalhan, M.[Maryam]
J. Chem. Thermodyn. 2015, 81, 131-135
ABSTRACT
Densities, viscosities, and refractive indices of ternary mixtures of ionic liquid 1-hexyl-3-methylimidazolium chloride ([HMIm]Cl) + Schiff base, N,N0-bis(2-pyridylmethylidene)-1,2-diiminoethane (BPIE), a mixture of cis- and trans-isomers, + N,N-dimethylacetamide (DMA) were measured at T = 298.15 K. From the obtained data, apparent molar volumes (V/), corresponding experimental slopes (Sv), standard partial molar volumes (V0 /), transfer volumes (DtV0 /), viscosity B-coefficients, solvation numbers (Sn), and molar refractions (RD) were calculated and discussed on the basis of (solute + solvent), and (solute + cosolute) interactions. As stated by cosphere overlap model (Yan et al., 2009), the negative transfer volumes obtained here show the dominance of (polar + nonpolar) interactions between the polar group of BPIE and the nonpolar alkyl chain of [HMIm]Cl and (nonpolar + nonpolar) interactions between the nonpolar groups of BPIE and the alkyl chain of [HMIm]Cl. The values of solvation numbers (Sn) were obtained as Sn greater than 2.5 and decrease as the concentration of BPIE in the mixtures increases. The Sn greater than 2.5 means that the IL is solvated in the mixtures, but the decreasing the Sn values indicates that the solvation of the ions of the ionic liquid decreases at higher concentrations of the Schiff base.
Compounds
# Formula Name
1 C10H19ClN2 1-hexyl-3-methylimidazolium chloride
2 C14H14N4 N,N'-bis(2-pyridinylmethylene)-1,2-ethanediamine
3 C4H9NO N,N-dimethylethanamide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 1; Liquid
  • Solvent: Molality, mol/kg - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 55
  • POMD
  • 3
  • 2
  • 1
  • Viscosity, Pa*s ; Liquid
  • Molality, mol/kg - 1; Liquid
  • Solvent: Molality, mol/kg - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 55
  • POMD
  • 3
  • 2
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Molality, mol/kg - 1; Liquid
  • Solvent: Molality, mol/kg - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 55
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 10
  • POMD
  • 3
  • 1
  • Viscosity, Pa*s ; Liquid
  • Molality, mol/kg - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 10
  • POMD
  • 3
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Molality, mol/kg - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 10
  • POMD
  • 3
  • 2
  • Mass density, kg/m3 ; Liquid
  • Molality, mol/kg - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 4
  • POMD
  • 3
  • 2
  • Viscosity, Pa*s ; Liquid
  • Molality, mol/kg - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 4
  • POMD
  • 3
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Molality, mol/kg - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 4