Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Thermodynamics of mixtures with strongly negative deviations from Raoult s law. XII. Densities, viscosities and refractive indices at T = (293.15 to 303.15) K for (1-heptanol, or 1-decanol + cyclohexylamine) systems. Application of the ERAS model to (1-alkanol + cyclohexylamine) mixtures

Sanz, L. F.[Luis F.], Gonzalez, J. A.[Juan A.], de la Fuente, I. G.[Isasias Garcia], Cobos, J. C.[Jose C.]
J. Chem. Thermodyn. 2015, 80, 161-171
ABSTRACT
Densities, q, kinetic viscosities, m, and refractive indices, nD, have been measured for (1-heptanol or 1-decanol + cyclohexylamine) systems at T = (293.15 to 303.15) K. The experimental q, m, nD values were obtained using an Anton Paar DMA 602 vibrating-tube densimeter, an Ubbelohde viscosimeter and a refractometer model RMF970, respectively. These data are used to determine a number of derived properties: excess molar volumes, VE m, dynamic viscosities, g, deviations of this magnitude from linear dependence on mole fraction, Dg, Gibbs energies of activation of viscous flow, DG ; deviations of nD from the ideal state, DnD, or molar refractions, Rm. In addition, (1-alkanol + cyclohexylamine) mixtures have been studied by means of the ERAS model. The corresponding parameters are reported. Viscosity data have been correlated by the following semi-empirical equations: Grunberg Nissan, Hind, Frenkel, Katti Chaudhri, Tamura Kurata, Teja Rice, McAllister and Heric. The deviations obtained are usually lower than 2%. The large negative VE m values of the studied solutions reveal the existence of strong alcohol-amine interactions. The properties VE m and Rm increase with the increasing of the chain length of the 1-alcohol, while Dg and DnD decrease. These variations suggest that interactions between unlike molecules are weakened and dispersive interactions become more important when the alcohol size increases. On the other hand, DG is essentially determined by enthalpic effects. The effect of replacing cyclohexylamine by an isomeric amine, hexylamine (HxA), dipropylamine (DPA) or N,N,N-triethylamine (TEA) in mixtures with a given 1- alkanol is also investigated. It is shown that the strength of the methanol-amine interactions become stronger in the sequence: TEA less than DPA less than HxA cyclohexylamine. The application of the ERAS model to (1-alcohol + cyclohexylamine) mixtures supports these findings. The parameters obtained in this work fit well into the general ERAS treatment of (1-alkanol + amine) systems.
Compounds
# Formula Name
1 C7H16O heptan-1-ol
2 C10H22O decan-1-ol
3 C6H13N cyclohexylamine
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 3
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 3
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 3
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 3
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 3
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 3
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 3
  • POMD
  • 3
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 3
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 3
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 48
  • POMD
  • 3
  • 1
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 48
  • POMD
  • 3
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 49
  • POMD
  • 3
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 39
  • POMD
  • 3
  • 2
  • Viscosity, Pa*s ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Capillary tube (Ostwald; Ubbelohde) method
  • 39
  • POMD
  • 3
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 41