Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Volumetric and optical properties for some (2-butanone + chloroalkane) binary mixtures at T = 298.15 K

Dragoescu, D.[Dana]
J. Chem. Thermodyn. 2014, 75, 13-19
ABSTRACT
Densities and refractive indices data for five binary systems of 2-butanone + 1-chloropentane, + 1,3-dichloropropane, + 1,4-dichlorobutane, + 1,1,1-trichloroethane, + 1,1,2,2-tetrachloroethane were measured at T = 298.15 K and atmospheric pressure, over the entire mole fraction range. The densities data of the studied mixtures have been used to calculate the excess molar volumes and the partial volumetric properties at infinite dilution. The refractive index data were used to calculate excess molar refractions and the deviations of experimental refraction indices from the predicted results were compared with those calculated using several mixing rules (Lorentz Lorenz, Gladstone Dale, Arago Biot, Edwards, Eykman). The excess quantities were fitted to a Redlich Kister type polynomial equation to derive the binary coefficients and estimate the standard deviations between the experimental and calculated quantities. The excess molar volumes and the excess molar refraction have evidenced intermolecular interactions between the components of mixtures.
Compounds
# Formula Name
1 C4H8O butanone
2 C5H11Cl 1-chloropentane
3 C3H6Cl2 1,3-dichloropropane
4 C4H8Cl2 1,4-dichlorobutane
5 C2H3Cl3 1,1,1-trichloroethane
6 C2H2Cl4 1,1,2,2-tetrachloroethane
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 5
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 6
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 6
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 14
  • POMD
  • 1
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 14
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 14
  • POMD
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 14
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 13
  • POMD
  • 1
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 13
  • POMD
  • 5
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 15
  • POMD
  • 5
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 15
  • POMD
  • 1
  • 6
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Vibrating tube method
  • 12
  • POMD
  • 1
  • 6
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 12