Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

(Liquid + liquid) equilibrium at T = 298.15 K for ternary mixtures of alkane + aromatic compounds + imidazolium-based ionic liquids

Dominguez, I.[Irene], Requejo, P. F.[Patricia F.], Canosa, J.[Jose], Dominguez, A.[Angeles]
J. Chem. Thermodyn. 2014, 74, 138-143
ABSTRACT
Ionic liquids, with their unique and tunable properties, can be an advantageous alternative as extractive solvents in separation processes involving systems containing aliphatic and aromatic hydrocarbons. In this work, (liquid + liquid) equilibrium (LLE) data for the ternary systems {nonane (1) + benzene (2) + 1- butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [BMim][NTf2] (3)}, {octane (1) + benzene (2) + 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide, [PMim][NTf2] (3)}, and {nonane (1) + aromatic compound (benzene or toluene or ethylbenzene) (2) + [PMim][NTf2] (3)} were determined at T = 298.15 K and atmospheric pressure. Selectivity and solute distribution ratio, derived from the equilibrium data, were used to determine if this ionic liquid can be considered as a potential solvent for the separation of aromatic compounds (benzene, toluene, and ethylbenzene) from alkanes (octane and nonane). The experimental data were satisfactorily correlated with NRTL and UNIQUAC models.
Compounds
# Formula Name
1 C8H18 octane
2 C9H20 nonane
3 C6H6 benzene
4 C7H8 toluene
5 C8H10 ethylbenzene
6 C9H13F6N3O4S2 1-methyl-3-propylimidazolium bis[(trifluoromethyl)sulfonyl]imide
7 C10H15F6N3O4S2 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 5
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 6
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 6
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 7
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 1
  • POMD
  • 7
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • 2
  • 7
  • Mole fraction - 2 ; Liquid mixture 2
  • Mole fraction - 2 ; Liquid mixture 1
  • Mole fraction - 3 ; Liquid mixture 1
  • Mole fraction - 3; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Density calibration data
  • Density calibration data
  • Density calibration data
  • 11
  • POMD
  • 3
  • 1
  • 6
  • Mole fraction - 1 ; Liquid mixture 2
  • Mole fraction - 1 ; Liquid mixture 1
  • Mole fraction - 3 ; Liquid mixture 1
  • Mole fraction - 3; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Density calibration data
  • Density calibration data
  • Density calibration data
  • 10
  • POMD
  • 3
  • 2
  • 6
  • Mole fraction - 2 ; Liquid mixture 2
  • Mole fraction - 2 ; Liquid mixture 1
  • Mole fraction - 3 ; Liquid mixture 1
  • Mole fraction - 3; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Density calibration data
  • Density calibration data
  • Density calibration data
  • 10
  • POMD
  • 4
  • 2
  • 6
  • Mole fraction - 2 ; Liquid mixture 2
  • Mole fraction - 2 ; Liquid mixture 1
  • Mole fraction - 4 ; Liquid mixture 1
  • Mole fraction - 4; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Density calibration data
  • Density calibration data
  • Density calibration data
  • 11
  • POMD
  • 5
  • 2
  • 6
  • Mole fraction - 2 ; Liquid mixture 2
  • Mole fraction - 2 ; Liquid mixture 1
  • Mole fraction - 5 ; Liquid mixture 1
  • Mole fraction - 5; Liquid mixture 2
  • Pressure, kPa; Liquid mixture 2
  • Temperature, K; Liquid mixture 2
  • Liquid mixture 2
  • Liquid mixture 1
  • Density calibration data
  • Density calibration data
  • Density calibration data
  • 10