Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Thermophysical properties of {R-fenchone + ethanol} at several temperatures and pressures

Martinez-Lopez, J. F.[Jose F.], Mainar, A. M.[Ana M.], Urieta, J. S.[Jose S.], Pardo, J. I.[Juan I.]
J. Chem. Thermodyn. 2014, 69, 48-55
ABSTRACT
In this paper, experimental excess enthalpy and density values for the binary mixture {R-fenchone + ethanol} are reported at four temperatures (283.15, 298.15, 313.15 and 328.15) K and atmospheric pressure (virtually 0.1 MPa). Densities have been also measured at the same temperatures and pressures ranging from 20 MPa to 40 MPa. In all cases the whole composition range has been considered. Excess molar volumes, isothermal compressibilities and isobaric thermal expansions have been calculated from the volumetric data at the four working temperatures. Excess enthalpies have been predicted using the UNIFAC (Dortmund) method and the Quantum Continuum Method COSMO-RS: UNIFAC shows the best performance. Four equations of state (Peng Robinson, Peng Robinson Stryjek Vera with volume translation, SAFT, PC-SAFT) have been tested as predictive models of the P-q-T behavior. Stryjek Vera EOS lead to the best results with an average in the percentage absolute average deviation of 0.6% and a maximum percentage absolute average deviation of 0.9%.
Compounds
# Formula Name
1 C2H6O ethanol
2 C10H16O (-)-fenchone
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 24
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 24
  • POMD
  • 1
  • 2
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 44
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 52
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Vibrating tube method
  • 260