Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

The thermodynamic stability of the three isomers of methoxybenzamide: An experimental and computational study

Almeida, A. R. R. P.[Ana R.R.P.], Monte, M. J. S.[Manuel J.S.], Matos, M. A. R., Morais, V. M. F.[Victor M.F.]
J. Chem. Thermodyn. 2014, 73, 12-22
ABSTRACT
Thermodynamic properties of ortho, meta and para methoxybenzamides were determined using the Knudsen effusion method and calorimetric experiments as well as computational approaches. The vapour pressure of the crystalline phase of the three isomers was measured and values of the standard (po = 0.1 MPa) molar enthalpy, Gibbs energy and entropy of sublimation, at T = 298.15 K, were derived. Static bomb combustion calorimetry was used to measure the standard molar enthalpies of combustion from which the standard molar enthalpies of formation in the crystalline state, at T = 298.15 K, were derived. Together with the standard molar enthalpies of sublimation, these results yielded the standard molar enthalpies of formation in gaseous phase of the three isomers. The standard Gibbs energies of formation in crystalline and gaseous phases were also derived and used to differentiate the thermodynamic stability of the three isomers. Moreover, differential scanning calorimetry analysis enabled determination of the temperature and molar enthalpies of fusion of the studied compounds. Gas-phase enthalpies of formation of the three compounds were estimated computationally at the G3 and G4 levels of theory and compared with the experimental results.
Compounds
# Formula Name
1 CO2 carbon dioxide
2 N2 nitrogen
3 H2O water
4 O2 oxygen
5 C8H9NO2 2-methoxybenzamide
6 C8H9NO2 3-methoxybenzamide
7 C8H9NO2 4-methoxybenzamide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 5
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 5
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 5
  • Vapor or sublimation pressure, kPa ; Crystal
  • Temperature, K; Crystal
  • Crystal
  • Gas
  • Calculated from knudsen effusion weight loss
  • 36
  • POMD
  • 6
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 6
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 6
  • Vapor or sublimation pressure, kPa ; Crystal
  • Temperature, K; Crystal
  • Crystal
  • Gas
  • Calculated from knudsen effusion weight loss
  • 42
  • POMD
  • 7
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 7
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 7
  • Vapor or sublimation pressure, kPa ; Crystal
  • Temperature, K; Crystal
  • Crystal
  • Gas
  • Calculated from knudsen effusion weight loss
  • 36
  • RXND
  • 5
  • 1
  • 2
  • 3
  • 4
  • Specific internal energy of reaction at constant volume, J/g
  • Static bomb calorimetry
  • 1
  • RXND
  • 6
  • 1
  • 2
  • 3
  • 4
  • Specific internal energy of reaction at constant volume, J/g
  • Static bomb calorimetry
  • 1
  • RXND
  • 7
  • 1
  • 2
  • 3
  • 4
  • Specific internal energy of reaction at constant volume, J/g
  • Static bomb calorimetry
  • 1