Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Thermodynamics of fenoxycarb in solution

Kuhs, M.[Manuel], Svard, M.[Michael], Rasmuson, A. C.[Ake C.]
J. Chem. Thermodyn. 2013, 66, 50-58
ABSTRACT
The solubility of fenoxycarb has been determined between 278 and 318 K in several organic solvents. The solid phase at equilibrium and some indication of polymorphism has been properly examined by powder XRD, DSC, Raman and ATR-FTIR spectroscopy, solution 1H NMR and SEM. Using literature data the activity of the solid phase within a Raoult s law definition has been calculated, based on which solution activity coefficients have been estimated. In ethyl acetate, the van t Hoff enthalpy of solution is constant over the temperature range and equals the melting enthalpy. However, it is shown that the solution is slightly non-ideal with the heat capacity difference term compensating for the activity coefficient term. In toluene, the van t Hoff enthalpy of solution is constant as well but clearly higher than the melting enthalpy. In methanol, ethanol and isopropanol, van Hoff curves are strongly non-linear, the slope however clearly approaching the melting enthalpy at higher temperatures. In all solvents, positive deviations from Raoult s law are prevailing. The activity coefficients follow a decreasing order of isopropanol greater than ethanol greater than methanol greater than toluene greater than ethyl acetate, and in all solvents decrease monotonically with increasing temperature. The highest activity coefficient is about 18 corresponding to about 2.5 kJ/mol of deviation from ideality.
Compounds
# Formula Name
1 C17H19NO4 fenoxycarb
2 C3H8O propan-2-ol
3 CH4O methanol
4 C2H6O ethanol
5 C4H8O2 ethyl acetate
6 C7H8 toluene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 1
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 1
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 2
  • 1
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • gravimetric method
  • 9
  • POMD
  • 3
  • 1
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • gravimetric method
  • 9
  • POMD
  • 4
  • 1
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • gravimetric method
  • 9
  • POMD
  • 5
  • 1
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • gravimetric method
  • 6
  • POMD
  • 6
  • 1
  • Mole fraction - 1 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • gravimetric method
  • 6