Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Thermophysical property characterization of ternary system containing {glycol (DEG/TEG/T4EG) + 2-amino-2-hydroxymethyl-1,3-propanediol + water}

Espiritu, E. S.[Elizabeth S.], Soriano, A. N.[Allan N.], Li, M.-H.[Meng-Hui]
J. Chem. Thermodyn. 2013, 59, 121-126
ABSTRACT
As part of our systematic study on physicochemical characterization of glycol-amine systems, thermophysical properties, including refractive index, density, and electrolytic conductivity, measurements were done on aqueous systems containing glycol and 2-amino-2-hydroxymethyl-1,3-propanediol (TRIS). The considered glycols are diethylene glycol (DEG), triethylene glycol (TEG), and tetraethylene glycol (T4EG). The measurements were done over a temperature range of 298.15 to 343.15 K at normal atmospheric pressure. Different concentrations (4 to 16 % by weight TRIS or 56 to 44 % water, in a fixed amount of glycol 40 %) were used. The influences of temperature and compositions on the measured properties were discussed and then correlated based on the equation proposed for aqueous glycol-salt systems. Calculation results show that the applied model was satisfactory in representing the measured properties in the aqueous systems containing the glycols and TRIS.
Compounds
# Formula Name
1 C4H10O3 diethylene glycol
2 C8H18O5 tetraethylene glycol
3 C6H14O4 triethylene glycol
4 H2O water
5 C4H11NO3 2-amino-2-(hydroxymethyl)-1,3-propanediol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 5
  • 1
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 5; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 30
  • POMD
  • 5
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 30
  • POMD
  • 5
  • 1
  • 4
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 30
  • POMD
  • 5
  • 3
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 5; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 30
  • POMD
  • 5
  • 3
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 30
  • POMD
  • 5
  • 3
  • 4
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 30
  • POMD
  • 5
  • 2
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 5; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 30
  • POMD
  • 5
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 30
  • POMD
  • 5
  • 2
  • 4
  • Electrical conductivity, S/m ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Alternating current cell with electrodes
  • 30