Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Experimental and computational thermodynamic study of ortho- meta- and para-aminobenzamide

Almeida, A. R. R. P.[Ana R.R.P.], Monte, M. J. S.[Manuel J.S.], Matos, M. A. R., Morais, V. M. F.[Victor M.F.]
J. Chem. Thermodyn. 2013, 59, 222-232
ABSTRACT
The vapour pressures of the three crystalline isomers of aminobenzamide were measured using the Knudsen mass-loss effusion technique. From the temperature dependence of the vapour pressures, the standard (p = 0.1 MPa) molar enthalpies, Gibbs energies and entropies of sublimation, at T = 298.15 K, were derived. The standard molar enthalpies of formation of the three isomeric aminobenzamides in the crystalline phase, at T = 298.15 K, were determined from static bomb calorimetric experiments. These values were combined with the results of standard molar enthalpies of sublimation to derive the standard molar enthalpy of formation in gaseous phase, at T = 298.15 K, of ortho-aminobenzamide, (113.1 +- 1.5) kJ mol 1, meta-aminobenzamide, (98.9 +- 1.6) kJ mol 1, and para-aminobenzamide, (100.3 +- 1.6) kJ mol 1. The temperature and molar enthalpy of fusion of the studied compounds were measured using differential scanning calorimetry. Additionally, very high-level quantum-chemical calculations at the composite G3 level have been conducted in an attempt to accurately describing the energetic of all isomers. The experimentally observed enthalpies of formation have been fully corroborated by the very accurate calculations.
Compounds
# Formula Name
1 CO2 carbon dioxide
2 N2 nitrogen
3 H2O water
4 O2 oxygen
5 C7H8N2O anthranilamide
6 C7H8N2O 3-aminobenzamide
7 C7H8N2O 4-aminobenzamide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 5
  • Triple point temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 5
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 5
  • Vapor or sublimation pressure, kPa ; Crystal
  • Temperature, K; Crystal
  • Crystal
  • Gas
  • Calculated from knudsen effusion weight loss
  • 36
  • POMD
  • 6
  • Triple point temperature, K ; Crystal 2
  • Crystal 2
  • Crystal 1
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 6
  • Triple point temperature, K ; Crystal 1
  • Crystal 1
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 6
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal 2
  • Crystal 2
  • Crystal 1
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 6
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal 1
  • Crystal 1
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 6
  • Vapor or sublimation pressure, kPa ; Crystal
  • Temperature, K; Crystal
  • Crystal
  • Gas
  • Calculated from knudsen effusion weight loss
  • 36
  • POMD
  • 7
  • Triple point temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DTA
  • 1
  • POMD
  • 7
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • DSC
  • 1
  • POMD
  • 7
  • Vapor or sublimation pressure, kPa ; Crystal
  • Temperature, K; Crystal
  • Crystal
  • Gas
  • Calculated from knudsen effusion weight loss
  • 34
  • RXND
  • 5
  • 1
  • 2
  • 3
  • 4
  • Specific internal energy of reaction at constant volume, J/g
  • Static bomb calorimetry
  • 1
  • RXND
  • 6
  • 1
  • 2
  • 3
  • 4
  • Specific internal energy of reaction at constant volume, J/g
  • Static bomb calorimetry
  • 1
  • RXND
  • 7
  • 1
  • 2
  • 3
  • 4
  • Specific internal energy of reaction at constant volume, J/g
  • Static bomb calorimetry
  • 1