Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Solubility and physical properties of sugars in pressurized water

Saldana, M. D. A.[Marleny D.A.], Alvarez, V. H.[Victor H.], Haldar, A.[Anupam]
J. Chem. Thermodyn. 2012, 55, 115-123
ABSTRACT
In this study, the solubility, density, and refractive index of glucose and lactose in water as a function of temperature were measured. For solubility of sugars in pressurized water, experimental data were obtained at pressures of (15 to 120) bar and temperatures of (373 to 433) K using a dynamic flow high pressure system. Density data for aqueous sugar solutions were obtained at pressures of (1 to 300) bar and temperatures of (298 to 343) K. The refractive index of aqueous sugar solutions was obtained at 293 K and atmospheric pressure. Activity coefficient models, Van Laar and the Conductor-like Screening Model-Segment Activity Coefficient (COSMO-SAC), were used to fit and predict the experimental solubility data, respectively. The results obtained showed that the solubility of both sugars in pressurized water increase with an increase in temperature. However, with the increase of pressure from 15 bar to 120 bar, the solubility of both sugars in pressurized water decreased. The Van Laar model fit the experimental aqueous solubility data with deviations lower than 13 and 53% for glucose and lactose, respectively. The COSMO-SAC model predicted qualitatively the aqueous solubility of these sugars.
Compounds
# Formula Name
1 C6H12O6 D-glucose
2 C12H22O11 4-O-.beta.-D-galactopyranosyl-D-glucose
3 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mass ratio of solute to solvent - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 18
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mass ratio of solute to solvent - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 18
  • POMD
  • 1
  • 3
  • Mass ratio of solute to solvent ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • Dynamic Flow High Pressure System
  • 21
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mass ratio of solute to solvent - 1; Liquid
  • Liquid
  • Vibrating tube method
  • 39
  • POMD
  • 2
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Mass ratio of solute to solvent - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 18
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mass ratio of solute to solvent - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 18
  • POMD
  • 2
  • 3
  • Mass ratio of solute to solvent ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • Dynamic Flow High Pressure System
  • 21
  • POMD
  • 2
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Mass ratio of solute to solvent - 2; Liquid
  • Liquid
  • Vibrating tube method
  • 39