Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Application of ERAS-model and Prigogine-Flory-Patterson theory to excess molar volumes for ternary mixtures of (2-chlorobutane + butylacetate + isobutanol) at T = 298.15 K

Khanlarzadeh, K., Iloukhani, H.
J. Chem. Thermodyn. 2011, 43, 11, 1583-1590
ABSTRACT
Densities of the ternary mixture consisting of {2-chlorobutane (1) + butylacetate (2) + isobutanol (3)} and related binary mixtures were measured over the whole range of composition at T = 298.15 K and ambient pressure. Excess molar volumes for the mixtures were derived and correlated as a function of mole fraction by using the Redlich-Kister and the Cibulka equations for binary and ternary mixtures, respectively. From the experimental data, partial molar volumes, excess partial molar volumes, partial molar volumes at infinite dilution and apparent molar volumes were also calculated. For all binary mixtures over the entire range of mole fractions excess molar volume data are positive. The experimental results of the constituted binary mixtures have been used to test the applicability of the extended real associated solution (ERAS-model) and Prigogine-Flory-Paterson (PFP) theory.
Compounds
# Formula Name
1 C4H9Cl 2-chlorobutane
2 C6H12O2 butyl ethanoate
3 C4H10O 2-methyl-1-propanol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 16
  • POMD
  • 1
  • 2
  • Excess molar volume, m3/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Calculated with densities of this investigation
  • 16
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 17
  • POMD
  • 3
  • 1
  • Excess molar volume, m3/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Calculated with densities of this investigation
  • 17
  • POMD
  • 3
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 15
  • POMD
  • 3
  • 2
  • Excess molar volume, m3/mol ; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Calculated with densities of this investigation
  • 15
  • POMD
  • 3
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Vibrating tube method
  • 39
  • POMD
  • 3
  • 1
  • 2
  • Excess molar volume, m3/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Mole fraction - 2; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Calculated with densities of this investigation
  • 39