ABSTRACT

Excess molar enthalpies, measured at the temperature 298.15 K and atmospheric pressure conditions by means of a flow microcalorimeter, are reported for the ternary mixtures {x1(dibutyl ether or dipropyl ether) + x2 2,2-dimethylbutane + (1 - x1 - x2) 2,3-dimethylbutane}. A smooth representation of the results is described and the constant-enthalpy contours for each ternary system are displayed on the respective Roozeboom diagrams. The results serve to show that good estimates of the excess molar enthalpies of the ternary systems can be obtained from the Liebermann-Fried model by using the physical properties of the constituent pure components and the parameters determined from the binary mixtures of these components.

Compounds

#	Formula	Name
1	C8H18O	dibutyl ether
2	C6H14O	dipropyl ether
3	C6H14	2,2-dimethylbutane
4	C6H14	2,3-dimethylbutane

Datasets

The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type	Compound-#	Property	Variable	Constraint	Phase	Method	#Points
POMD	1	Mass density, kg/m3 ; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid		Liquid	Vibrating tube method	1
POMD	2	Mass density, kg/m3 ; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid		Liquid	Vibrating tube method	1
POMD	3	Mass density, kg/m3 ; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid		Liquid	Vibrating tube method	1
POMD	4	Mass density, kg/m3 ; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid		Liquid	Vibrating tube method	1
POMD	4 1	Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid	Mole fraction - 1; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Flow calorimetry	20
POMD	3 1	Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid	Mole fraction - 1; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Flow calorimetry	20
POMD	3 2	Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid	Mole fraction - 2; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Flow calorimetry	19
POMD	4 2	Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid	Mole fraction - 2; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Flow calorimetry	20

Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Excess molar enthalpies of ternary mixtures (dibutyl ether or dipropyl ether + 2,2-dimethylbutane + 2,3-dimethylbutane) at the temperature 298.15 K

Hasan, S. M. N.[S M Nazmul], Peng, D.-Y.[Ding-Yu]

ABSTRACT