Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Phase behavior of (CO2 + methanol + lauric acid) system

Ferreira, F. M.[Franciele M.], Ramos, L. P.[Luiz P.], Ndiaye, P. M.[Papa M.], Corazza, M. L.[Marcos L.]
J. Chem. Thermodyn. 2011, 43, 7, 1074-1082
ABSTRACT
In this study the phase equilibrium behaviors of the binary system (CO2 + lauric acid) and the ternary system (CO2 + methanol + lauric acid) were determined. The static synthetic method, using a variable-volume view cell, was employed to obtain the experimental data in the temperature range of (293 to 343) K and pressures up to 24 MPa. The mole fractions of carbon dioxide were varied according to the systems as follows: (0.7524 to 0.9955) for the binary system (CO2 + lauric acid); (0.4616 to 0.9895) for the ternary system (CO2 + methanol + lauric acid) with a methanol to lauric acid molar ratio of (2:1); and (0.3414 to 0.9182) for the system (CO2 + methanol + lauric acid) with a methanol to lauric acid molar ratio of (6:1). For these systems (vapor + liquid), (liquid + liquid), (vapor + liquid + liquid), and (solid + fluid) transitions were observed. The phase equilibrium data obtained for the systems were modeled using the Peng-Robinson equation of state with the classical van der Waals mixing rule with a satisfactory correlation between experimental and calculated values.
Compounds
# Formula Name
1 CO2 carbon dioxide
2 C12H24O2 dodecanoic acid
3 CH4O methanol
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Liquid
  • Gas
  • Crystal - 2
  • Liquid
  • Closed cell (Static) method
  • 1
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Crystal - 2
  • Closed cell (Static) method
  • 11
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Mole fraction - 1; Liquid mixture 1
  • Gas
  • Liquid mixture 1
  • Liquid mixture 2
  • Closed cell (Static) method
  • 4
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Gas
  • Gas
  • Liquid mixture 1
  • Liquid mixture 2
  • Closed cell (Static) method
  • 4
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Mole fraction - 1; Liquid
  • Gas
  • Crystal - 2
  • Liquid
  • Closed cell (Static) method
  • 1
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Gas
  • Mole fraction - 1; Liquid
  • Gas
  • Liquid
  • Closed cell (Static) method
  • 9
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Mole fraction - 1; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Closed cell (Static) method
  • 4
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Fluid (supercritical or subcritical phases)
  • Mole fraction - 1; Fluid (supercritical or subcritical phases)
  • Temperature, K; Fluid (supercritical or subcritical phases)
  • Fluid (supercritical or subcritical phases)
  • Crystal - 2
  • Closed cell (Static) method
  • 14
  • POMD
  • 3
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Mole fraction - 1; Liquid mixture 1
  • Mole fraction - 3; Liquid mixture 1
  • Gas
  • Liquid mixture 1
  • Liquid mixture 2
  • Closed cell (Static) method
  • 5
  • POMD
  • 3
  • 1
  • 2
  • Triple point temperature, K ; Gas
  • Mole fraction - 1; Liquid mixture 1
  • Mole fraction - 3; Liquid mixture 1
  • Gas
  • Liquid mixture 1
  • Liquid mixture 2
  • Closed cell (Static) method
  • 5
  • POMD
  • 3
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid mixture 1
  • Mole fraction - 1; Liquid mixture 1
  • Mole fraction - 3; Liquid mixture 1
  • Temperature, K; Liquid mixture 1
  • Liquid mixture 1
  • Liquid mixture 2
  • Closed cell (Static) method
  • 5
  • POMD
  • 3
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Mole fraction - 1; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Gas
  • Gas
  • Liquid
  • Closed cell (Static) method
  • 14
  • POMD
  • 3
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Mole fraction - 1; Liquid
  • Mole fraction - 3; Liquid
  • Temperature, K; Liquid
  • Gas
  • Liquid
  • Closed cell (Static) method
  • 56