Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Determination of phase transition points of ionic liquids by combination of thermal analysis and conductivity measurements at very low heating and cooling rates

Wachter, P.[Phillipp], Schreiner, C.[Christian], Schweiger, H.-G.[Hans-Georg], Gores, H. J.[Heiner Jakob]
J. Chem. Thermodyn. 2010, 42, 7, 900-903
ABSTRACT
The determination of phase transition points of nine different ionic liquids (ILs) was performed by thermal analysis with simultaneous recording of conductivity. Conductivity of electrolyte solutions and ILs drastically changes during phase transitions and thus is an additional and very sensitive indicator for measuring phase transition points. Evaluation of temperature time functions and conductivity time functions with our computer-coupled automated equipment enabled the determination of melting temperatures with high accuracy and reliability. This claim is based on large samples, low temperature change rates and by regularly repeated measurements, i.e. at least seven measurements per IL. The melting temperatures of 1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate, 1-butyl-1-methylpyrrolidinium tris(penta-fluoroethyl)trifluorophosphate, and 1-methyl-3-propylimidazolium iodide were, to our knowledge, determined for the first time. The melting temperatures of the other 1-butyl-1-methylpyrrolidinium-, 1-ethyl-3-methylimidazolium-, 1-hexyl-3-methylimidazolium-, and trimethylsulfonium-based ILs showed either a very good accordance with values published in literature or were distinctly higher.
Compounds
# Formula Name
1 C11H20F6N2O4S2 1-butyl-1-methylpyrrolidinium bis[(trifluoromethyl)sulfonyl]imide
2 C10H20F3NO3S 1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate
3 C15H20F18NP 1-butyl-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate
4 C8H11N5 1-ethyl-3-methylimidazolium dicyanamide
5 C6H11BF4N2 1-ethyl-3-methylimidazolium tetrafluoroborate
6 C8H11F6N3O4S2 1-ethyl-3-methylimidazolium bis((trifluoromethyl)sulfonyl)imide
7 C12H19F6N3O4S2 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide
8 C7H13IN2 1-methyl-3-propylimidazolium iodide
9 C5H9N3S trimethylsulfonium dicyanamide
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • Heating/Cooling curves
  • 1
  • POMD
  • 2
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • Heating/Cooling curves
  • 1
  • POMD
  • 2
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • from temp. dependence of electrical conductivity
  • 1
  • POMD
  • 3
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • Heating/Cooling curves
  • 1
  • POMD
  • 3
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • from temp. dependence of electrical conductivity
  • 1
  • POMD
  • 4
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • Heating/Cooling curves
  • 1
  • POMD
  • 4
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • from temp. dependence of electrical conductivity
  • 1
  • POMD
  • 5
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • Heating/Cooling curves
  • 1
  • POMD
  • 5
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • from temp. dependence of electrical conductivity
  • 1
  • POMD
  • 6
  • Normal melting temperature, K ; Crystal 4
  • Crystal 4
  • Liquid
  • Air at 1 atmosphere
  • Heating/Cooling curves
  • 1
  • POMD
  • 6
  • Normal melting temperature, K ; Crystal 4
  • Crystal 4
  • Liquid
  • Air at 1 atmosphere
  • from temp. dependence of electrical conductivity
  • 1
  • POMD
  • 6
  • Normal melting temperature, K ; Crystal 1
  • Crystal 1
  • Liquid
  • Air at 1 atmosphere
  • Heating/Cooling curves
  • 1
  • POMD
  • 7
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • Heating/Cooling curves
  • 1
  • POMD
  • 8
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • Heating/Cooling curves
  • 1
  • POMD
  • 8
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • from temp. dependence of electrical conductivity
  • 1
  • POMD
  • 9
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • Heating/Cooling curves
  • 1
  • POMD
  • 9
  • Normal melting temperature, K ; Crystal
  • Crystal
  • Liquid
  • Air at 1 atmosphere
  • from temp. dependence of electrical conductivity
  • 1