Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Phase behaviour for the (carbon dioxide + 2-phenoxyethyl acrylate) and (carbon dioxide + 2-phenoxyethyl methacrylate) systems at temperatures from (313.2 to 393.2) K and pressures from (5 to 31) MPa

Byun, H. -S., Jang, Y.-S.[Yoon-Seok], Yoo, K.-P.[Ki-Pung]
J. Chem. Thermodyn. 2010, 42, 6, 758-763
ABSTRACT
The solubility curves for the (carbon dioxide + 2-phenoxyethyl acrylate) and (carbon dioxide + 2-phenoxyethyl methacrylate) systems were determined by a static view cell apparatus at five temperatures (313.2, 333.2, 353.2, 373.2, and 393.2) K as well as pressures up to 31.43 MPa. Two {carbon dioxide + (meth)acrylate} systems had continuous critical mixture curves with maxima in pressure located between the critical temperatures of carbon dioxide and 2-phenoxyethyl (meth)acrylate. The solubility of 2-phenoxyethyl (meth)acrylate in the {carbon dioxide + 2-phenoxyethyl (meth)acrylate} systems increases as the temperature increases at a fixed pressure. The (carbon dioxide + 2-phenoxyethyl acrylate) and (carbon dioxide + 2-phenoxyethyl methacrylate) systems exhibit type-I phase behaviour. The experimental results for the (carbon dioxide + 2-phenoxyethyl acrylate) and (carbon dioxide + 2-phenoxyethyl methacrylate) systems correlate with the Peng Robinson equation of state using a van der Waals one-fluid mixing rule including two adjustable parameters. The critical properties of 2-phenoxyethyl acrylate and 2-phenoxyethyl methacrylate were predicted with the Joback and Lee Kesler method.
Compounds
# Formula Name
1 CO2 carbon dioxide
2 C11H12O3 2-phenoxyethyl acrylate
3 C12H14O3 2-phenoxyethyl methacrylate
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Liquid
  • Gas
  • High Pressure Cell
  • 64
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Gas
  • Mole fraction - 3; Gas
  • Gas
  • Liquid
  • High Pressure Cell
  • 3
  • POMD
  • 1
  • 3
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Liquid
  • Gas
  • High Pressure Cell
  • 3
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Gas
  • Temperature, K; Gas
  • Mole fraction - 2; Gas
  • Gas
  • Liquid
  • High Pressure Cell
  • 1
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • High Pressure Cell
  • 2
  • POMD
  • 1
  • 2
  • Vapor or sublimation pressure, kPa ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Liquid
  • Gas
  • High Pressure Cell
  • 57