Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Thermodynamic study of 1,2,3-triphenylbenzene and 1,3,5-triphenylbenzene

Ribeiro da Silva, M. A. V.[Manuel A. V.], Santos, L. M. N. B. F.[Luis M. N. B. F.], Lima, L. M. S. S. M. S. S.[Luis M. Spencer S.]
J. Chem. Thermodyn. 2010, 42, 1, 134-139
ABSTRACT
The energetic study of 1,2,3-triphenylbenzene (1,2,3-TPhB) and 1,3,5-triphenylbenzene (1,3,5-TPhB) isomers was carried out by making use of the mini-bomb combustion calorimetry and Knudsen mass-loss effusion techniques. The mini-bomb combustion calorimetry technique was used to derive the standard (p = 0.1 MPa) molar enthalpies of formation in the crystalline state from the measured standard molar energies of combustion for both isomers. The Knudsen mass-loss effusion technique was used to measure the dependence with the temperature of the vapour pressure of crystalline 1,2,3-TPhB, which allowed the derivation of the standard molar enthalpy of sublimation, by application of the Clausius Clapeyron equation. The sublimation study of 1,3,5-TPhB had been performed previously. From the combination of data obtained by both techniques, the standard molar enthalpies of formation in the gaseous state, for both isomers, at T = 298.15 K, were calculated. The results indicate a higher stability of the 1,3,5-TPhB isomer relative to 1,2,3-TPhB, similarly to the terphenyls. Nevertheless, the 1,2,3-TPhB isomer is not as energetically destabilized as one might expect, supporting the existence of a p p displacive stacking interaction between both pairs of outer phenyl rings. The volatility difference between the two isomers is ruled by the enthalpy of sublimation. The volatility of the 1,2,3-TPhB is two orders of magnitude higher than the 1,3,5-TPhB isomer, at T = 298.15 K.
Compounds
# Formula Name
1 CO2 carbon dioxide
2 H2O water
3 O2 oxygen
4 C graphite
5 H2 hydrogen
6 C24H18 1,2,3-triphenylbenzene
7 C24H18 1,3,5-triphenylbenzene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 6
  • Molar enthalpy of transition or fusion, kJ/mol ; Crystal
  • Temperature, K; Crystal
  • Crystal
  • Gas
  • Clausius-Clapeyron Eq with Heat Capacity
  • 1
  • POMD
  • 6
  • Vapor or sublimation pressure, kPa ; Crystal
  • Temperature, K; Crystal
  • Crystal
  • Gas
  • Calculated from knudsen effusion weight loss
  • 33
  • POMD
  • 6
  • Molar enthalpy, kJ/mol ; Gas
  • Temperature, K; Gas
  • Pressure, kPa; Gas
  • Gas
  • Clausius-Clapeyron Eq
  • 1
  • RXND
  • 6
  • 1
  • 2
  • 3
  • Specific internal energy of reaction at constant volume, J/g
  • Micro-bomb calorimetry
  • 1
  • RXND
  • 7
  • 1
  • 2
  • 3
  • Specific internal energy of reaction at constant volume, J/g
  • Micro-bomb calorimetry
  • 1
  • RXND
  • 6
  • 4
  • 5
  • Molar enthalpy of reaction, kJ/mol
  • Micro-bomb calorimetry
  • 1
  • RXND
  • 6
  • 4
  • 5
  • Molar enthalpy of reaction, kJ/mol
  • Micro-bomb calorimetry
  • 1
  • RXND
  • 7
  • 4
  • 5
  • Molar enthalpy of reaction, kJ/mol
  • Micro-bomb calorimetry
  • 1
  • RXND
  • 7
  • 4
  • 5
  • Molar enthalpy of reaction, kJ/mol
  • Micro-bomb calorimetry
  • 1