Name: ThermoML Representation of Published Experimental Data from Journal of Chemical Thermodynamics (0021-9614, Elsevier)
Creator: Thermodynamics Research Center
License: https://www.nist.gov/open/license

ABSTRACT

Densities, dynamic viscosities, and refractive indices of the ternary system composed by methanol, methyl acetate, and 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide and the binary combinations of these constituents have been measured. The excess molar volumes as well as molar refraction and viscosity changes of mixing were calculated and fitted to the Redlich Kister equation to determine the fitting parameters and the root-mean-square deviations.

Compounds

#	Formula	Name
1	CH4O	methanol
2	C3H6O2	methyl ethanoate
3	C14H23F6N3O4S2	1-octyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide

Datasets

The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type	Compound-#	Property	Variable	Constraint	Phase	Method	#Points
POMD	3	Mass density, kg/m3 ; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid		Liquid	Pycnometric method	1
POMD	3	Viscosity, Pa*s ; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid		Liquid	Capillary tube (Ostwald; Ubbelohde) method	1
POMD	1 2	Viscosity, Pa*s ; Liquid	Mole fraction - 2; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Capillary tube (Ostwald; Ubbelohde) method	9
POMD	1 2	Refractive index (Na D-line) ; Liquid	Mole fraction - 2; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Standard Abbe refractometry	9
POMD	1 2	Mass density, kg/m3 ; Liquid	Mole fraction - 2; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Vibrating tube method	9
POMD	1 2	Excess molar volume, m3/mol ; Liquid	Mole fraction - 2; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Calculated with densities of this investigation	9
POMD	2 3	Viscosity, Pa*s ; Liquid	Mole fraction - 2; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Capillary tube (Ostwald; Ubbelohde) method	11
POMD	2 3	Refractive index (Na D-line) ; Liquid	Mole fraction - 2; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Standard Abbe refractometry	11
POMD	2 3	Mass density, kg/m3 ; Liquid	Mole fraction - 2; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Vibrating tube method	11
POMD	2 3	Excess molar volume, m3/mol ; Liquid	Mole fraction - 2; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Calculated with densities of this investigation	11
POMD	1 3	Viscosity, Pa*s ; Liquid	Mole fraction - 1; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Capillary tube (Ostwald; Ubbelohde) method	10
POMD	1 3	Refractive index (Na D-line) ; Liquid	Mole fraction - 1; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Standard Abbe refractometry	10
POMD	1 3	Mass density, kg/m3 ; Liquid	Mole fraction - 1; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Vibrating tube method	10
POMD	1 3	Excess molar volume, m3/mol ; Liquid	Mole fraction - 1; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Calculated with densities of this investigation	10
POMD	1 2 3	Viscosity, Pa*s ; Liquid	Mole fraction - 2; Liquid Mole fraction - 1; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Capillary tube (Ostwald; Ubbelohde) method	99
POMD	1 2 3	Refractive index (Na D-line) ; Liquid	Mole fraction - 2; Liquid Mole fraction - 1; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Standard Abbe refractometry	99
POMD	1 2 3	Mass density, kg/m3 ; Liquid	Mole fraction - 2; Liquid Mole fraction - 1; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Vibrating tube method	99
POMD	1 2 3	Excess molar volume, m3/mol ; Liquid	Mole fraction - 2; Liquid Mole fraction - 1; Liquid	Temperature, K; Liquid Pressure, kPa; Liquid	Liquid	Calculated with densities of this investigation	99

Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Physical and excess properties of (methyl acetate + methanol + 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide) and its binary mixtures at T = 298.15 K and atmospheric pressure

Andreatta, A.[Alfonsina], Arce, A.[Alberto], Rodil, E.[Eva], Soto, A.[Ana]

ABSTRACT