Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Liquid densities, heat capacities, refractive index and excess quantities for {protic ionic liquids + water} binary system

Anouti, M.[Meriem], Caillon-Caravanier, M.[Magaly], Dridi, Y.[Yosra], Jacquemin, J.[Johan], Hardacre, C.[Christopher], Lemordant, D.
J. Chem. Thermodyn. 2009, 41, 6, 799-808
ABSTRACT
Densities, ?, of aqueous solutions of the room temperature protic ionic liquid (PIL), pyrrolidinium nitrate are determined at the atmospheric pressure over the temperature range from (283.15 to 323.15) K and within the whole composition range. The molar isobaric heat capacities, Cp, and refractive index, nD, of {PIL + water} binary system are measured at 298.15 K. The excess molar volumes VE, excess molar isobaric heat capacities View the MathML source, and deviation from ideality of refractive index ?phin, of pyrrolidinium nitrate aqueous solutions were deduced from the experimental results as well as apparent molar volumes Vphi, partial molar volumes View the MathML source, and thermal expansion coefficients ?p. The VE values were found to be positive over the entire composition range at all temperatures studied therein, whereas deviations from ideality were negative for refractive index ?phin. The volumetric properties of binary mixtures containing water and four other protic ionic liquids, such as pyrrolidinium hydrogen sulfate, pyrrolidinium formate, collidinium formate, and diisopropyl-ethylammonium formate were also determined at 298.15 K. Results have been then discussed in terms of molecular interactions and molecular structures in these binary mixtures.
Compounds
# Formula Name
1 C4H10N2O3 pyrrolidinium nitrate
2 C4H11NO4S pyrrolidinium hydrogen sulfate
3 C5H11NO2 pyrrolidinium formate
4 C9H13NO2 2,4,6-trimethylpyridinium formate
5 C9H21NO2 ethyldiisopropylammonium formate
6 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 16
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 8
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Pycnometric method
  • 1
  • POMD
  • 6
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 16
  • POMD
  • 6
  • Refractive index (Na D-line) ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 6
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 8
  • POMD
  • 6
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 12
  • POMD
  • 6
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Pycnometric method
  • 135
  • POMD
  • 6
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Small sample (50 mg) DSC
  • 12
  • POMD
  • 6
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Pycnometric method
  • 11
  • POMD
  • 6
  • 3
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Pycnometric method
  • 11
  • POMD
  • 6
  • 4
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Pycnometric method
  • 11
  • POMD
  • 6
  • 5
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Pycnometric method
  • 15