Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Measurement and correlation of the (p, ?, T) relation of liquid n-heptane, n-nonane, 2,4-dichlorotoluene, and bromobenzene in the temperature range from (233.15 to 473.15) K at pressures up to 30 MPa for use as density reference liquids

Schilling, G., Kleinrahm, R., Wagner, W.
J. Chem. Thermodyn. 2008, 40, 7, 1095-1105
ABSTRACT
Comprehensive (p, ?, T) measurements on n-heptane, n-nonane, 2,4-dichlorotoluene, and bromobenzene were carried out in the homogeneous liquid phase for temperatures from (233.15 to 473.15) K at pressures up to 30 MPa. The measurements were performed by using an accurate single-sinker densimeter based on the Archimedes buoyancy principle. The total uncertainty of the measurements in density was estimated to be 0.02% (level of confidence 95%), except for densities at T greater-or-equal, slanted 413.15 K, where the uncertainty was estimated to be 0.03%. Based on the experimental results, accurate correlation equations for the density of the four liquids have been established. Comparisons with previous results of other experimentalists and with values calculated from current equations of state are presented. The purpose of this work was to provide accurate correlation equations for the densities of the four selected liquids so that these liquids can be used as density reference liquids for the calibration of densimeters and, in particular, for the calibration of vibrating-tube densimeters.
Compounds
# Formula Name
1 C7H16 heptane
2 C9H20 nonane
3 C7H6Cl2 1,3-dichloro-4-methylbenzene
4 C6H5Br bromobenzene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Buoyancy - hydrostatic balance with magnetic suspension - one sinker
  • 151
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Buoyancy - hydrostatic balance with magnetic suspension - one sinker
  • 134
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Buoyancy - hydrostatic balance with magnetic suspension - one sinker
  • 190
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Buoyancy - hydrostatic balance with magnetic suspension - one sinker
  • 200