Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Volumetric properties of binary mixtures of ethers and acetonitrile: Experimental results and application of the Prigogine Flory Patterson theory

Torres, R. B., Ortolan, M. I., Volpe, P. L. O.
J. Chem. Thermodyn. 2008, 40, 3, 442-459
ABSTRACT
In this work, densities of binary mixtures of {acetonitrile + di-n-butyl ether (DNBE), or + tetrahydrofuran (THF), or + 1,4-dioxane (DIO), or + di-isopropyl ether (DIPE)}, have been determined under atmospheric pressure as a function of composition and temperature using a vibrating-tube densimeter. The temperatures studied were T = (288.15, 293.15, 298.15, and 303.15) K. The excess molar volumes oV E mP, calculated from density data, are negative over the whole mole fraction range for the temperature range studied. The partial molar volumes at infinite dilution of each component oV1i P have been determined using three different methods. The experimental results have been used to test the applicability of the Prigogine Flory Patterson (PFP) theory
Compounds
# Formula Name
1 C2H3N acetonitrile
2 C4H8O2 1,4-dioxane
3 C6H14O diisopropyl ether
4 C8H18O dibutyl ether
5 C4H8O tetrahydrofuran
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 4
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 4
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:6
  • 4
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:6
  • 4
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 4
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 116
  • POMD
  • 1
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 5; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:3
  • 124
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:3
  • 112
  • POMD
  • 1
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 108