Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Density, viscosity, refractive index, excess molar enthalpy, viscosity, and refractive index deviations for the (1-butanol + 2-butanone) binary system at T = 303 K. A new adiabatic calorimeter for heat of mixing

Clara, R. A.[Rene A.], Marigliano, A. C. G.[Ana C. Gomez], Solimo, H. N.[Horacio N.]
J. Chem. Thermodyn. 2008, 40, 2, 292-297
ABSTRACT
Density, viscosity, refractive index, and heat of mixing measurements for {x1 1-butanol + (1 x1) 2-butanone} at T = 303 K were made over the whole concentration range. Data of the binary mixture were further used to calculate the viscosity and refractive index deviations, and excess molar enthalpy. The excess or deviation properties were fitted with the Redlich Kister polynomial relation to obtain their coefficients and standard deviations. The construction of an adiabatic calorimeter useful in the neighbourhood of room temperature is described. Its performance was checked by measuring the heat of mixing for {x1 benzene + (1 x1) cyclohexane} over the whole concentration range at T = 298 K. Experimental results are within a standard deviation of 9 J Ae mol 1 of the accepted literature values.
Compounds
# Formula Name
1 C4H10O butan-1-ol
2 C4H8O butanone
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Viscosity, Pa*s ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CAPTUB::UFactor:4
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 1
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Viscosity, Pa*s ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CAPTUB::UFactor:4
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB::UFactor:2
  • 1
  • POMD
  • 1
  • 2
  • Excess molar enthalpy (molar enthalpy of mixing), kJ/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • CALVET:UFactor:8
  • 13
  • POMD
  • 1
  • 2
  • Viscosity, Pa*s ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • CAPTUB:UFactor:4
  • 15
  • POMD
  • 1
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Mole fraction - 1; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 17
  • POMD
  • 1
  • 2
  • Mass density, kg/m3 ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 17