Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

A study of densities and volumetric properties of binary mixtures of N-methyl-2-pyrrolidone with xylene at different temperatures and atmospheric pressure

Chen, J.[Jianhui], Shen, R.[Runpu], Liu, W.[Wei], Yu, G.[Guoqi]
J. Chem. Thermodyn. 2007, 39, 6, 934-941
ABSTRACT
The densities of binary mixtures of N-methyl-2-pyrrolidone (NMP) with o-xylene, m-xylene, and p-xylene, including those of pure liquids, over the entire composition range were measured at T = (293.15, 303.15, 313.15, 323.15, 333.15, 343.15, and 353.15) K and atmospheric pressure. From the experimental data, the excess molar volume, V E m, and partial molar volumes, Vm,1 and Vm,2, were calculated over whole composition range. The V E m values were found negative for all the mixtures at each temperature studied, and decrease with rising temperature. The extent of negative deviations in V E m values follows the order: p-xylene greater than m-xylene greater than o-xylene. The variation of these parameters with composition and temperature of the mixtures has been discussed.
Compounds
# Formula Name
1 C8H10 1,2-dimethylbenzene
2 C8H10 1,3-dimethylbenzene
3 C8H10 1,4-dimethylbenzene
4 C5H9NO N-methylpyrrolidone
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 8
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 8
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 8
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 8
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 119
  • POMD
  • 2
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 119
  • POMD
  • 3
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 119