Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Apparent molar volumes and apparent molar heat capacities of aqueous magnesium nitrate, strontium nitrate, and manganese nitrate at temperatures from 278.15 K to 393.15 K and at the pressure 0.35 MPa

Jones, J. S., Ziemer, S. P., Brown, B. R., Woolley, E. M.
J. Chem. Thermodyn. 2007, 39, 4, 550-560
ABSTRACT
Apparent molar volumes V and apparent molar heat capacities Cp,were determined at the pressure 0.35 MPa for aqueous solutions of magnesium nitrate Mg(NO3)2 at molalities m = (0.02 to 1.0) mol Ae kg-1, strontium nitrate Sr(NO3)2 at m = (0.05 to 3.0) mol Ae kg-1, and manganese nitrate Mn(NO3)2 at m = (0.01 to 0.5) mol Ae kg-1. Our V/ values were calculated from solution densities obtained at T = (278.15 to 368.15) K using a vibrating-tube densimeter, and our Cp, values were calculated from solution heat capacities obtained at T = (278.15 to 393.15) K using a twin fixed-cell, differential, temperature-scanning calorimeter. Empirical functions of m and T were fitted to our results, and standard state partial molar volumes and heat capacities were obtained over the ranges of T investigated.
Compounds
# Formula Name
1 MgN2O6 magnesium nitrate
2 N2O6Sr strontium nitrate
3 MnN2O6 manganese nitrate
4 H2O water
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 4
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • LDSC:UFactor:0.2
  • 216
  • POMD
  • 4
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 110
  • POMD
  • 4
  • 2
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • LDSC:UFactor:0.2
  • 216
  • POMD
  • 4
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 99
  • POMD
  • 4
  • 3
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • LDSC:UFactor:0.2
  • 192
  • POMD
  • 4
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Molality, mol/kg - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:2
  • 55