Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Thermodynamics of mixtures involving some (benzene derivatives + benzonitrile)

Calvo-Iglesias, E., Bravo, R., Pintos, M., Amigo, A.[Alfredo], Roux, A. H., Roux-Desgranges, G.
J. Chem. Thermodyn. 2007, 39, 4, 561-567
ABSTRACT
Interactions of binary mixtures involving some benzene derivatives (ethylbenzene, o-, m-, p-xylene, isopropylbenzene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, and methoxybenzene) with benzonitrile were investigated in continuation of our previous studies on binary systems (benzene or toluene + benzonitrile). Heat capacities by volume unit, determined with a Picker flow calorimeter at T = 298.15 K, and densities, measured by using Picker vibrating densimeters at the temperatures (298.15 and 308.15) K, are reported. Measurements were made over the entire range of mole fraction. From the primary measurements, the corresponding excess quantities VE and CEp ;m are obtained. The magnitude of these experimental quantities together with HE literature data is discussed in terms of the nature and type of intermolecular interactions in binary mixtures.
Compounds
# Formula Name
1 C7H5N benzonitrile
2 C8H10 ethylbenzene
3 C8H10 1,2-dimethylbenzene
4 C8H10 1,3-dimethylbenzene
5 C8H10 1,4-dimethylbenzene
6 C9H12 isopropylbenzene
7 C9H12 1,2,4-trimethylbenzene
8 C9H12 1,3,5-trimethylbenzene
9 C7H8O anisole
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 2
  • POMD
  • 2
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 2
  • POMD
  • 3
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 2
  • POMD
  • 4
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 2
  • POMD
  • 5
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 1
  • POMD
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 2
  • POMD
  • 6
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 1
  • POMD
  • 6
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 2
  • POMD
  • 7
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 1
  • POMD
  • 7
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 2
  • POMD
  • 8
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 1
  • POMD
  • 8
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 2
  • POMD
  • 9
  • Molar heat capacity at constant pressure, J/K/mol ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Flow calorimetry
  • 1
  • POMD
  • 9
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB::UFactor:4
  • 2
  • POMD
  • 2
  • 1
  • Excess molar heat capacity, J/K/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • FLOW:UFactor:0.5
  • 13
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 28
  • POMD
  • 3
  • 1
  • Excess molar heat capacity, J/K/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • FLOW:UFactor:0.5
  • 13
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 28
  • POMD
  • 1
  • 4
  • Excess molar heat capacity, J/K/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Flow calorimetry
  • 13
  • POMD
  • 1
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 22
  • POMD
  • 1
  • 5
  • Excess molar heat capacity, J/K/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Flow calorimetry
  • 13
  • POMD
  • 1
  • 5
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 22
  • POMD
  • 1
  • 8
  • Excess molar heat capacity, J/K/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • FLOW:UFactor:0.5
  • 12
  • POMD
  • 1
  • 8
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 28
  • POMD
  • 6
  • 1
  • Excess molar heat capacity, J/K/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • Flow calorimetry
  • 12
  • POMD
  • 6
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 28
  • POMD
  • 7
  • 1
  • Excess molar heat capacity, J/K/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • FLOW:UFactor:0.5
  • 13
  • POMD
  • 7
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 37
  • POMD
  • 1
  • 9
  • Excess molar heat capacity, J/K/mol ; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Temperature, K; Liquid
  • Liquid
  • FLOW:UFactor:0.5
  • 9
  • POMD
  • 1
  • 9
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 1; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:4
  • 26