Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Temperature and salt addition effects on the solubility behaviour of some phenolic compounds in water

Noubigh, A.[Adel], Abderrabba, M.[Manef], Provost, E.[Elise]
J. Chem. Thermodyn. 2007, 39, 2, 297-303
ABSTRACT
Solubility-temperature dependence data for six phenolic compounds (PhC), contained in olive mill wastewater (OMWW), in water and in some chloride salts (KCl, NaCl, and LiCl) aqueous solutions have been presented and solution standard molar enthalpies (?solH) were determined using Van t Hoff plots. The temperature was varied from 293.15 K to 318.15 K. Solubility data were estimated using a thermostated reactor and HPLC analysis. It has been observed that solubility, in pure water and in aqueous chloride solutions, increases with increasing temperature. The salting-out LiCl greater than NaCl greater than KCl order obtained at 298.15 K is confirmed. Results were interpreted in terms of the salt hydration shells and the ability of the solute to form hydrogen-bond with water. The standard molar Gibbs free energies of transfer of PhC (?trG) from pure water to aqueous solutions of the chloride salts have been calculated from the solubility data. In order to estimate the contribution of enthalpic and entropic terms, standard molar enthalpies (?trH) and entropies (?trS) of transfer have also been calculated. The decrease in solubility is correlated to the positive ?trG value which is mainly of enthalpic origin.
Compounds
# Formula Name
1 C10H10O4 4-hydroxy-3-methoxycinnamic acid
2 C9H10O5 4-hydroxy-3,5-dimethoxybenzoic acid
3 C7H6O5 3,4,5-trihydroxybenzoic acid
4 C7H6O4 3,4-dihydroxybenzoic acid
5 C8H8O3 vanillin
6 C8H8O4 4-hydroxy-3-methoxybenzoic acid
7 H2O water
8 ClK potassium chloride
9 ClNa sodium chloride
10 ClLi lithium chloride
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • 7
  • Molality, mol/kg ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • high-performace liquid chromatography
  • 7
  • POMD
  • 2
  • 7
  • Molality, mol/kg ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • high-performance liquid chromatography
  • 7
  • POMD
  • 3
  • 7
  • Molality, mol/kg ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • high-performance liquid chromatography
  • 6
  • POMD
  • 4
  • 7
  • Molality, mol/kg ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 4
  • high-performance liquid chromatography
  • 6
  • POMD
  • 5
  • 7
  • Molality, mol/kg ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • high-performance liquid chromatography
  • 6
  • POMD
  • 6
  • 7
  • Molality, mol/kg ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 6
  • high-performance liquid chromatography
  • 6
  • POMD
  • 1
  • 8
  • 7
  • Molality, mol/kg - 1 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 8; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • high-performance liquid chromatography
  • 13
  • POMD
  • 1
  • 9
  • 7
  • Molality, mol/kg - 1 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 9; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • high-performance liquid chromatography
  • 13
  • POMD
  • 1
  • 10
  • 7
  • Molality, mol/kg - 1 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 10; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 1
  • high-performance liquid chromatography
  • 13
  • POMD
  • 2
  • 8
  • 7
  • Molality, mol/kg - 2 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 8; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • high-performance liquid chromatography
  • 13
  • POMD
  • 2
  • 9
  • 7
  • Molality, mol/kg - 2 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 9; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • high-performance liquid chromatography
  • 13
  • POMD
  • 2
  • 10
  • 7
  • Molality, mol/kg - 2 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 10; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 2
  • high-performance liquid chromatography
  • 13
  • POMD
  • 3
  • 8
  • 7
  • Molality, mol/kg - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 8; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • high-performance liquid chromatography
  • 6
  • POMD
  • 3
  • 9
  • 7
  • Molality, mol/kg - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 9; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • high-performance liquid chromatography
  • 6
  • POMD
  • 3
  • 10
  • 7
  • Molality, mol/kg - 3 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 10; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 3
  • high-performance liquid chromatography
  • 6
  • POMD
  • 4
  • 8
  • 7
  • Molality, mol/kg - 4 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 8; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 4
  • high-performance liquid chromatography
  • 6
  • POMD
  • 4
  • 9
  • 7
  • Molality, mol/kg - 4 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 9; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 4
  • high-performance liquid chromatography
  • 6
  • POMD
  • 4
  • 10
  • 7
  • Molality, mol/kg - 4 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 10; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 4
  • high-performance liquid chromatography
  • 6
  • POMD
  • 5
  • 8
  • 7
  • Molality, mol/kg - 5 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 8; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • high-performance liquid chromatography
  • 6
  • POMD
  • 5
  • 9
  • 7
  • Molality, mol/kg - 5 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 9; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • high-performance liquid chromatography
  • 6
  • POMD
  • 5
  • 10
  • 7
  • Molality, mol/kg - 5 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 10; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 5
  • high-performance liquid chromatography
  • 6
  • POMD
  • 6
  • 8
  • 7
  • Molality, mol/kg - 6 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 8; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 6
  • high-performance liquid chromatography
  • 6
  • POMD
  • 6
  • 9
  • 7
  • Molality, mol/kg - 6 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 9; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 6
  • high-performance liquid chromatography
  • 6
  • POMD
  • 6
  • 10
  • 7
  • Molality, mol/kg - 6 ; Liquid
  • Temperature, K; Liquid
  • Solvent: Molality, mol/kg - 10; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Crystal - 6
  • high-performance liquid chromatography
  • 6