Thermodynamics Research Center / ThermoML | Journal of Chemical Thermodynamics

Densities and volumetric properties of N-methyl-2-pyrrolidone with aromatic hydrocarbon at different temperature

Ye, W.[Weidong], Shen, R.[Runpu], Liu, W.[Wei], Chen, J.[Jianhui]
J. Chem. Thermodyn. 2007, 39, 1, 115-122
ABSTRACT
Densities of binary mixtures formed by benzene, or toluene, or ethylbenzene with N-methyl-2-pyrrolidone have been measured over the full range of compositions at atmospheric pressure and various temperatures by means of a vibrating-tube densimeter. The excess molar volume calculated from the density data provide the temperature dependence of in the temperature range of (293.15 to 353.15) K. The results were correlated using the fourth-order Redlich Kister polynomial equation, with the maximum likelihood principle being applied for the determination of the adjustable parameters. Partial molar volumes of two components were also calculated. It was found that the in the systems studied decrease with rising temperature.
Compounds
# Formula Name
1 C5H9NO N-methylpyrrolidone
2 C6H6 benzene
3 C7H8 toluene
4 C8H10 ethylbenzene
Datasets
The table above is generated from the ThermoML associated json file (link above). POMD and RXND refer to PureOrMixture and Reaction Datasets. The compound numbers are included in properties, variables, and phases, if specificied; the numbers refer to the table of compounds on the left.
Type Compound-# Property Variable Constraint Phase Method #Points
  • POMD
  • 1
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 7
  • POMD
  • 2
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 2
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 6
  • POMD
  • 3
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 3
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:16
  • 7
  • POMD
  • 4
  • Refractive index (Na D-line) ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • Standard Abbe refractometry
  • 1
  • POMD
  • 4
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 7
  • POMD
  • 2
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 2; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 102
  • POMD
  • 3
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 3; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:16
  • 119
  • POMD
  • 4
  • 1
  • Mass density, kg/m3 ; Liquid
  • Temperature, K; Liquid
  • Mole fraction - 4; Liquid
  • Pressure, kPa; Liquid
  • Liquid
  • VIBTUB:UFactor:8
  • 119